Mixed mode brittle and ductile fracture of a high strength rotor steel at room temperature

被引：11
|
作者：
Smith, DJ [1 ]
Ayatollahi, MR [1 ]
Davenport, JCW [1 ]
Swankie, TD [1 ]
机构：
[1] Univ Bristol, Dept Mech Engn, Bristol BS8 1TR, Avon, England
来源：
INTERNATIONAL JOURNAL OF FRACTURE | 1998年 / 94卷 / 03期
基金：
英国工程与自然科学研究理事会;
关键词：
mixed mode; brittle and ductile fracture; fracture transition; rotor steel; plastic collapse;
D O I：
10.1023/A:1007572406726
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The mixed mode fracture of a high strength rotor steel has been investigated at room temperature using single edge notched specimens. In mode I, and for limited amounts of shear loading, the steel exhibited cleavage fracture. For conditions near mode II ductile fracture occurred. A transition from brittle to ductile fracture occurred for mixed mode loading. Finite element analysis provided estimates of the extent of near crack tip yielding and elastic-plastic stress intensity factors. Test results agreed with the maximum tensile stress (MTS) criterion for small scale yielding for limited amounts of shear loading. The load for mode II fracture was lower than predicted from the MTS criterion, but higher than predicted from plastic collapse predictions. Observed fracture angles where in broad agreement with the predicted fracture mechanisms. The load for the transition from brittle to ductile fracture was found to agree approximately with the predicted load.
引用
收藏
页码：235 / 250
页数：16
相关论文
共 50 条
  • [1] Mixed Mode Brittle and Ductile Fracture of a High Strength Rotor Steel at Room Temperature
    D.J. Smith
    M.R. Ayatollahi
    J.C.W. Davenport
    T.D. Swankie
    International Journal of Fracture, 1998, 94 : 235 - 250
  • [2] Brittle and ductile fracture transition in steels subjected to mixed mode loading
    Swankie, TD
    Davenport, JCW
    Smith, DJ
    ADVANCES IN FRACTURE RESEARCH, VOLS 1-6, 1997, : 207 - 214
  • [3] Fracture mechanics characterization of mixed-mode toughness of thermoplast/glass interfaces (brittle/ductile interfacial mixed-mode fracture)
    Dollhofer, J
    Beckert, W
    Lauke, B
    Schneider, K
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2001, 15 (13) : 1559 - 1587
  • [4] Mixed-mode I/II fracture behaviour of a high strength steel
    Hallback, N
    INTERNATIONAL JOURNAL OF FRACTURE, 1997, 87 (04) : 363 - 388
  • [5] Mixed-mode I/II fracture behaviour of a high strength steel
    N. Hallbäck
    International Journal of Fracture, 1997, 87 : 363 - 388
  • [6] Experiments, analysis and simulation of mixed mode ductile fracture
    Deng, Xiaomin
    Sutton, Michael A.
    Proceedings of the ASME Pressure Vessels and Piping Conference 2005, Vol 6, 2005, 6 : 179 - 182
  • [7] A Mixed-mode Fracture Criterion for Brittle Materials
    Li Mingtian
    He Junlian
    SUSTAINABLE DEVELOPMENT OF URBAN AND RURAL AREAS, 2014, 507 : 234 - 237
  • [8] Study on the ductile fracture under mixed mode loading condition
    Department of Mechanical Engineering, Tokyo University of Science, 2641 Yamazaki, Noda-shi, Chiha, 278 8510, Japan
    Nihon Kikai Gakkai Ronbunshu A, 2008, 9 (1235-1242): : 1235 - 1242
  • [9] J-Dominance in Mixed Mode Ductile Fracture Specimens
    Y. Arun Roy
    R. Narasimhan
    International Journal of Fracture, 1997, 88 (3) : 259 - 279
  • [10] A mixed mode phase-field model of ductile fracture
    Huber, William
    Zaeem, Mohsen Asle
    JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2023, 171
12345