PERFORMANCE OF RESISTANCE SPOT-WELDED JOINTS IN ADVANCED HIGH-STRENGTH STEEL IN STATIC AND DYNAMIC TENSILE TESTS

被引：14

作者：

den Uijl, N. ^{[1
]}

Okada, T. ^{[2
]}

Moolevliet, T. ^{[1
]}

Mennes, A. ^{[1
]}

van der Aa, E. ^{[1
]}

Uchihara, M. ^{[2
]}

Smith, S. ^{[1
]}

Nishibata, H. ^{[2
]}

van der Veldt, T. ^{[1
]}

Fukui, K. ^{[3
]}

机构：

[1] Tata Steel R&D, Dept Automot Applicat, Joining Grp, Ijmuiden, Netherlands

[2] Sumitomo Met Ind Ltd, Corp Res & Dev Labs, Amagasaki, Hyogo 660, Japan

[3] Sumitomo Met Ind Ltd, Tokyo, Japan

来源：

WELDING IN THE WORLD | 2012年 / 56卷 / 7-8期

关键词：

Dynamic loading; Mechanical properties; Resistance spot welding; Steels; Static loading; Tensile tests; FAILURE MODE; MICROSTRUCTURE; SIZE; BEHAVIOR; AHSS;

D O I：

10.1007/BF03321365

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The performance of resistance spot-welded joints in advanced high-strength steel sheets is critical for the application of these materials in safety-critical areas. To be able to predict the performance of such joints from available material data would be of great benefit to the automotive industry. This report starts with a review of literature about various aspects of spot weld performance in advanced high-strength steels. It then describes experimental work whereby a set of resistance spot-welded joints in various advanced high-strength steels was tested in lap shear and peel-type tensile testing. Testing was done both statically and dynamically. The steel sheet materials varied in microstructural and chemical compositions, strength and thickness. The goal of the tests was to investigate possible relations between material characteristics and performance of the welded joints. Therefore, the experimental results are related to several material parameters, i.e., sheet thickness, base metal yield and tensile strength, carbon content and various Carbon Equivalent numbers.

引用

页码：51 / 63

页数：13

共 37 条

[1] [Anonymous], 2008, SAE T
[2] [Anonymous], 1967, IX53567 IIW
[3] [Anonymous], 2005, 960022 GS BWM GROUP
[4] [Anonymous], P 3 INT SEM ADV RES
[5] [Anonymous], P 3 INT SEM ADV RES
[6] AWS, 2007, AWS D8.1M:2007
[7] Blondeau R., 1973, P INT C 9 12 NOV ROM, VLXX
[8] AN INVESTIGATION OF FAILURE TYPES IN HIGH-STRENGTH STEEL RESISTANCE SPOT WELDS
Bouzekri, M.
Dancette, S.
Dupuy, T.
Lens, A.
Oultit, B. Nait
Massardier, V.
Fabregue, D.
Klocker, H.
[J]. WELDING IN THE WORLD, 2010, 54 (3-4) : 3 - 14
[9] Chaillet J.M., 1976, MEMOIRES SCI REV NOV, P298
[10] Chao YJ, 2003, SCI TECHNOL WELD JOI, V8, P133, DOI 10.1179/136217103225008955

← 1 2 3 4 →