NANO-STRUCTURAL AND NANO-CHEMICAL ANALYSIS OF NI-BASE ALLOY/LOW ALLOY STEEL DISSIMILAR METAL WELD INTERFACES

被引：23
|
作者：
Choi, Kyoung Joon [1 ]
Shin, Sang Hun [1 ]
Kim, Jung Jin [1 ]
Jung, Ju Ang [1 ]
Kim, Ji Hyun [1 ]
机构：
[1] UNIST, Interdisciplinary Sch Green Energy, Ulsan Metropolitan City 689798, South Korea
来源：
NUCLEAR ENGINEERING AND TECHNOLOGY | 2012年 / 44卷 / 05期
关键词：
Dissimilar Metal Weld; Scanning Electron Microscope; Secondary Ion Mass Spectrometry; Transmission Electron Microscope; 3-Dimensional Atom Probe Tomography; A533; Gr; B; Alloy; 152; Stress Corrosion Cracking; MECHANICAL PROPERTY; STAINLESS-STEEL; BEHAVIOR; CRACKING; REGION; JOINT;
D O I：
10.5516/NET.07.2012.009
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
The dissimilar metal joints welded between Ni-based alloy, Alloy 690 and low alloy steel, A533 Gr. B with Alloy 152 filler metal were characterized by using optical microscope, scanning electron microscope, transmission electron microscope, secondary ion mass spectrometry and 3-dimensional atom probe tomography. It was found that in the weld root region, the weld was divided into several regions including unmixed zone in Ni-base alloy, fusion boundary, and heat-affected zone in the low alloy steel. The result of nanostructural and nanochemical analyses in this study showed the non-homogeneous distribution of elements with higher Fe but lower Mn, Ni and Cr in A533 Gr. B compared with Alloy 152, and the precipitation of carbides near the fusion boundary.
引用
收藏
页码：491 / 500
页数：10
相关论文
共 22 条
  • [1] THREE DIMENSIONAL ATOM PROBE STUDY OF NI-BASE ALLOY/LOW ALLOY STEEL DISSIMILAR METAL WELD INTERFACES
    Choi, Kyoung Joon
    Shin, Sang Hun
    Kim, Jong Jin
    Jung, Ju Ang
    Kim, Ji Hyun
    NUCLEAR ENGINEERING AND TECHNOLOGY, 2012, 44 (06) : 673 - 682
  • [2] NANOSTRUCTURAL CHARACTERIZATION OF NI-BASE ALLOY/LOW ALLOY STEEL DISSIMILAR METAL WELD (DMW) INTERFACES
    Choi, Kyoung Joon
    Kim, Jong Jin
    Kim, Ji Hyun
    PROCEEDINGS OF THE 20TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING AND THE ASME 2012 POWER CONFERENCE - 2012, VOL 1, 2012, : 551 - 558
  • [3] Fracture assessment for a dissimilar metal weld of low alloy steel and Ni-base alloy
    Ogawa, Takuya
    Itatani, Masao
    Saito, Toshiyuki
    Hayashi, Takahiro
    Narazaki, Chihiro
    Tsuchihashi, Kentaro
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2012, 90-91 : 61 - 68
  • [4] In situ Raman spectroscopic analysis of surface oxide films on Ni-base alloy/low alloy steel dissimilar metal weld interfaces in high-temperature water
    Kim, Jongjin
    Choi, Kyung Joon
    Bahn, Chi Bum
    Kim, Ji Hyun
    JOURNAL OF NUCLEAR MATERIALS, 2014, 449 (1-3) : 181 - 187
  • [5] Effects of thermal aging on microstructures of low alloy steel-Ni base alloy dissimilar metal weld interfaces
    Choi, Kyoung Joon
    Kim, Jong Jin
    Lee, Bong Ho
    Bahn, Chi Bum
    Kim, Ji Hyun
    JOURNAL OF NUCLEAR MATERIALS, 2013, 441 (1-3) : 493 - 502
  • [6] In-situ investigation of thermal aging effect on oxide formation in Ni-base alloy/low alloy steel dissimilar metal weld interfaces
    Kim, Jongjin
    Kim, Seung Hyun
    Choi, Kyung Joon
    Bahn, Chi Bum
    Hwang, Il Soon
    Kim, Ji Hyun
    CORROSION SCIENCE, 2014, 86 : 295 - 303
  • [7] STUDY ON FRACTURE BEHAVIOR AND ASSESSMENT FOR DISSIMILAR METAL WELD OF LOW ALLOY STEEL AND NI-BASE ALLOY WELD USING A BWR REACTOR PRESSURE VESSEL MATERIAL
    Hayashi, Takahiro
    Ogawa, Takuya
    Yoshida, Shuichi
    Itatani, Masao
    Hattori, Yasuhiro
    Yamaoka, Tetsushi
    Tanaka, Shigeaki
    Saito, Toshiyuki
    PROCEEDINGS OF ASME 2021 PRESSURE VESSELS AND PIPING CONFERENCE (PVP2021), VOL 4, 2021,
  • [8] Microstructural and hardness investigations on a dissimilar metal weld between low alloy steel and Alloy 82 weld metal
    Chen, Z. R.
    Lu, Y. H.
    Ding, X. F.
    Shoji, T.
    MATERIALS CHARACTERIZATION, 2016, 121 : 166 - 174
  • [9] Characterization of low alloy ferritic steel-Ni base alloy dissimilar metal weld interface by SPM techniques, SEM/EDS, TEM/EDS and SVET
    Wang, Siyan
    Ding, Jie
    Ming, Hongliang
    Zhang, Zhiming
    Wang, Jianqiu
    MATERIALS CHARACTERIZATION, 2015, 100 : 50 - 60
  • [10] Effects of phosphorus segregation on stress corrosion cracking in the heat-affected zone of a dissimilar weld joint between a Ni-base alloy and a low alloy steel
    Zhai, Ziqing
    Abe, Hiroshi
    Miyahara, Yuichi
    Watanabe, Yutaka
    CORROSION SCIENCE, 2015, 92 : 32 - 42
123