Flux-Angle-Difference Feedback Control for the Brushless Doubly Fed Machine

被引:4
作者
Xia, Chaoying [1 ]
Hou, Xiaoxin [1 ]
Chen, Feng [1 ]
机构
[1] Tianjin Univ, Sch Elect & Informat Engn, 92 Weijin Rd, Tianjin 300072, Peoples R China
来源
ENERGIES | 2018年 / 11卷 / 01期
关键词
brushless doubly fed machine (BDFM); losing control problem; direct torque control (DTC); flux-angle-difference feedback control (FADFC);
D O I
10.3390/en11010071
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
In direct torque control (DTC) of the brushless doubly fed machine (BDFM) system, the inverter switching voltage vectors cannot always meet the control requirements, and the torque will lose control. For the losing control problem, this paper presents a solution of indirectly controlling torque by controlling the angle difference between the power motor (PM) stator flux and the control motor (CM) stator flux (called as the flux-angle-difference). Firstly, based on the CM static coordinate system BDFM model, the derivative equations of CM stator flux amplitude, the torque, and the flux-angle-difference are deduced. The losing control problem of BDFM's DTC is studied by utilizing the CM stator flux amplitude and the torque derivatives. From the flux-angle-difference derivative, it is found that the phase angles of the flux-angle-difference derivative curves remain unchanged. Based on this property, by replacing the torque hysteresis comparator of conventional DTC with a flux-angle-difference hysteresis comparator, a modified control strategy called flux-angle-difference feedback control (FADFC) is proposed to solve the losing control problem. Finally, the validity and the good dynamic characteristic of the FADFC strategy are verified by simulation results.
引用
收藏
页数:16
相关论文
共 27 条
[1]   Two-level VSC based predictive direct torque control of the doubly fed induction machine with reduced torque and flux ripples at low constant switching frequency [J].
Abad, Gonzalo ;
Rodriguez, Miguel Angel ;
Poza, Javier .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2008, 23 (03) :1050-1061
[2]   Performance analysis and testing of a 250 kW medium-speed brushless doubly-fed induction generator [J].
Abdi, Ehsan ;
McMahon, Richard ;
Malliband, Paul ;
Shao, Shiyi ;
Mathekga, Mmamolatelo Ezekiel ;
Tavner, Peter ;
Abdi, Salman ;
Oraee, Ashknaz ;
Long, Teng ;
Tatlow, Mark .
IET RENEWABLE POWER GENERATION, 2013, 7 (06) :631-638
[3]   Simple Flux Regulation for Improving State Estimation at Very Low and Zero Speed of a Speed Sensorless Direct Torque Control of an Induction Motor [J].
Alsofyani, Ibrahim Mohd ;
Idris, Nik Rumzi Nik .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2016, 31 (04) :3027-3035
[4]   Generalized Vector Control for Brushless Doubly Fed Machines With Nested-Loop Rotor [J].
Barati, Farhad ;
McMahon, Richard ;
Shao, Shiyi ;
Abdi, Ehsan ;
Oraee, Hashem .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2013, 60 (06) :2477-2485
[5]   Generalised look-up table concept for direct torque control in induction drives with multilevel inverters [J].
Brando, Gianluca ;
Dannier, Adolfo ;
Del Pizzo, Andrea ;
Rizzo, Renato ;
Spina, Ivan .
IET ELECTRIC POWER APPLICATIONS, 2015, 9 (08) :556-567
[6]  
Fattahi S.J., 2011, P 2011 IEEE 9 INT C
[7]   Electromagnetic-Thermal Design Optimization of the Brushless Doubly Fed Induction Generator [J].
Gorginpour, Hamed ;
Oraee, Hashem ;
McMahon, Richard A. .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (04) :1710-1721
[8]   New integration algorithms for estimating motor flux over a wide speed range [J].
Hu, J ;
Wu, B .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 1998, 13 (05) :969-977
[9]   Sensored and sensorless speed control methods for brushless doubly fed reluctance motors [J].
Jovanovic, M. .
IET ELECTRIC POWER APPLICATIONS, 2009, 3 (06) :503-513
[10]   Control design and experimental verification of the brushless doubly-fed machine for stand-alone power generation applications [J].
Liu, Yi ;
Ai, Wu ;
Chen, Bing ;
Chen, Ke ;
Luo, Guang .
IET ELECTRIC POWER APPLICATIONS, 2016, 10 (01) :25-35