Surface roughness of cellulose hollow fiber dialysis membranes and platelet adhesion

A great deal of research has been conducted focusing on membrane materials with reference to their blood compatibility, but blood compatibility is influenced both by the material used in membranes and their structure, and by the flow conditions at the membrane surface. Accordingly, the relationship between membrane surface roughness and hemocompatibility has been evaluated using five types of membranes of differing surface roughness by evaluating the inner surfaces of the hollow fibers by atomic force microscopy (AFM) and by measuring platelet adhesion ratios using bovine blood. The yield stress, which equates to flow characteristics, was also evaluated using a glycerol suspension of polymethylmethacrylate (PMMA), a Bingham fluid. It was found that membranes having rough surfaces had high platelet adhesion ratios and poor hemocompatibility, whereas those with smoother surfaces had lower platelet adhesion ratios and better hemocompatibility. Measurement of the yield stresses for these membranes revealed higher values far those with rough surfaces, and lower values for those with smoother polyethylene glycol (PEG) grafted surfaces. This suggests that flow conditions at the membrane surface differ according to its surface roughness, and that this difference in flow conditions also influences hemocompatibility.