Comparison of coated and uncoated carbide drill bits for drilling titanium grade 2 material

被引：26

作者：

Kumar, B. Suresh ^{[1
]}

Vijayan, V. ^{[1
]}

Baskar, N. ^{[2
]}

机构：

[1] K Ramakrishnan Coll Technol, Tiruchirappalli 621112, Tamil Nadu, India

[2] Saranathan Coll Engn, Tiruchirappalli 620012, Tamil Nadu, India

来源：

MECHANIKA | 2016年 / 06期

关键词：

drilling; uncoated and TiAlN coated drill bit; vibration; thrust force; torque; burr dimensions; surface roughness; PERFORMANCE;

D O I：

10.5755/j01.mech.22.6.13467

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The performance of TiAIN coated and uncoated carbide drill bits when drilling titanium alloy were investigated on vibration, thrust force, torque, machining time, burr dimensions and surface roughness. In response, the experiments were carried out on CNC vertical milling machine with two factors and each factor consists of three levels. For experimentation, the ranges of spindle speed and feed rate selection is based on tool manufacturer recommendations. In addition, the effects of spindle speed and feed rate on considered responses were explored and the same is presented in this paper.

引用

页码：571 / 575

页数：5

共 12 条

[1] Experimental study of tool life transition and wear monitoring in turning operation using a hybrid method based on wavelet multi-resolution analysis and empirical mode decomposition [J].

Babouri, Mohamed Khemissi ;

Ouelaa, Nouredine ;

Djebala, Abderrazek .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (9-12) :2017-2028

[2] Chip morphology and hole surface texture in the drilling of cast aluminum alloys [J].

Batzer, SA ;

Haan, DM ;

Rao, PD ;

Olson, WW ;

Sutherland, JW .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 79 (1-3) :72-78

[3] Experimental studies and optimization of process parameters for burrs in dry drilling of stacked metal materials [J].

Bi, Shusheng ;

Liang, Jie .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 53 (9-12) :867-876

[4] A numerical simulator to predict the dynamical behavior of the self-vibratory drilling head [J].

Guibert, Nicolas ;

Paris, Henri ;

Rech, Joel .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (06) :644-655

[5] Finite Element Analysis of Drilling of Titanium Alloy [J].

Isbilir, Ozden ;

Ghassemieh, Elaheh .

11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10 :1877-1882

[6] Tool temperature in titanium drilling [J].

Li, Rui ;

Shih, Albert J. .

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2007, 129 (04) :740-749

[7] High-throughput drilling of titanium alloys [J].

Li, Rui ;

Hegde, Parag ;

Shih, Albert J. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (01) :63-74

[8] Off-line feedrate optimization with multiple constraints for corner milling of a cavity [J].

Liu, Xianli ;

Ding, Yun-peng ;

Yue, Caixu ;

Zhang, Rui ;

Tong, Xin .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (9-12) :1899-1907

[9] An experimental investigation of the effect of coatings and cutting parameters on the dry drilling performance of aluminium alloys [J].

Rivero, A ;

Aramendi, G ;

Herranz, S ;

de Lacalle, LNL .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 28 (1-2) :1-11

[10] Drill and clamping interface in high-performance drilling [J].

Rotberg, J ;

Lenz, E ;

Levin, M .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 1998, 14 (04) :229-238

← 1 2 →