3D FEM simulation of the thermal events during AA6061 aluminum extrusion

被引：40

作者：

Chanda, T ^{[1
]}

Zhou, J ^{[1
]}

Kowalski, L ^{[1
]}

Duszczyk, J ^{[1
]}

机构：

[1] Delft Univ Technol, Mat Sci Lab, NL-2628 AL Delft, Netherlands

来源：

SCRIPTA MATERIALIA | 1999年 / 41卷 / 02期

关键词：

FEM; simulation; extrusion; temperature;

D O I：

10.1016/S1359-6462(99)00145-1

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The temperature rise that occurs in the billet and die during extrusion of the AA6061 alloy at different reduction ratios and ram speeds was characterized using the DEFORM 3D finite element method (FEM). Most of the temperature are occurred at the initial stage of extrusion. As the ram traveled further, the temperature became stable. Both reduction ratio and ram speed influenced the magnitude of the temperature rise. Temperature inhomogeneity on the cross section of the extrudate was also observed.

引用

页码：195 / 202

页数：8

共 50 条

[31] Experimental and Simulation Investigation on the Ultrasonic-Assisted Bending of Annealed and Aged AA6061 Aluminum Alloy Sheets
Asadi, F.
Rezaei Ashtiani, H. R.
Pak, A.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020, 73 (11) : 2851 - 2859
[32] 3D FEM-NEM Material Joining Simulation In Porthole Die Extrusion
Gagliardi, F.
Alfaro, I.
Filice, L.
Cueto, E.
PROGRESS IN EXTRUSION TECHNOLOGY AND SIMULATION OF LIGHT METAL ALLOYS, 2012, 491 : 151 - +
[33] 3D FEM simulation of hot extrusion process of AerMet100 Steel
Chen, Jun-Feng
Yan, Mu-Fu
Wang, Xiang-Rong
Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2007, 28 (SUPPL.): : 367 - 370
[34] Compressive Behavior of AA6061 at Room Temperature and Validation of the FE Model Based on Optical 3D Measurement Technique
Abdullah, A. B.
Samad, Z.
ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY II, 2014, 594-595 : 909 - 913
[35] Laser surface cladding of SiC/Si3N4 on AA6061 aluminum alloy
Man, HC
Kwok, CT
Yue, TM
ICALEO (R)'99: PROCEEDING OF THE LASER MATERIALS PROCESSING CONFERENCE, VOL 87, PTS 1 AND 2, 2000, 87 : F216 - F224
[36] Numerical Simulation of 6061 Aluminum Alloys during the Semi-Solid Backward Extrusion
Shang Shuzhen
Lu Guimin
Tang Xiaoling
Zhao Zuxin
Cao Wei
ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3, 2011, 52-54 : 1532 - +
[37] COUPLED ELECTROMAGNETIC-THERMAL SIMULATION OF A POWER TRANSFORMER BY 3D FEM
Henriques, Henrique de Oliveira
Vizeu, Carlos Eduardo
de Souza, Paulo Cesar
Costa, Mauricio Caldora
Sotelo, Guilherme Goncalves
de Sousa, Jonaylton Moura
Fortes, Marcio Zamboti
Ferreira, Vitor Hugo
ACTA POLYTECHNICA, 2020, 60 (05) : 400 - 409
[38] ANALYSIS OF THE MICROSTRUCTURAL EVOLUTION DURING HOT EXTRUSION OF AA6060 BY MEANS OF FEM SIMULATION
El Mehtedi, M.
Donati, L.
Spigarelli, S.
Tomesani, L.
METALLURGIA ITALIANA, 2009, (06): : 33 - 39
[39] Prediction of temperature evolution during the extrusion of 7075 aluminium alloy at various ram speeds by means of 3D FEM simulation
Li, L
Zhou, J
Duszczyk, J
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 145 (03) : 360 - 370
[40] Simulation of 3D material flow in friction stir welding of AA6061-T6
Department of Engineering Mechanics, Faculty of Vehicle Engineering and Mechanics, Dalian University of Technology, Dalian 116024, China
China Weld Eng Ed, 2008, 1 (57-63): : 57 - 63

← 1 2 3 4 5 →