Removal of Volatile Solids from Greywater Using Sand Filters

Sand filtration is a primary stage of treatment for reuse of greywater. This study aimed at assessing the volatile solid removal efficiency of a sand filter and imitating its performance using analytical simulation. This study used artificial greywater, medium sand as a filtering material, and nine PVC cylinders as filter columns. Samples of the sand were collected after 6, 14 and 21 days, with the aim of specific deposit determination. The vertical distribution of specific deposit (volatile solids) in the sand filters was typical for gravitationally operated sand filters. Relatively high removal efficiency of volatile solids (51-60%) was achieved at relatively low cumulative hydraulic load. The average removal efficiency of organic compounds (detected as chemical oxygen demand) was 26.8%. Maximum specific deposit was achieved for a cumulative hydraulic load of 363.6 m. The filter coefficient was identified empirically for application of the Iwasaki formula. The filter coefficient was corrected for a better fit of the modelled values with measured values.