An improved analytical model of cutting temperature in orthogonal cutting of Ti6Al4V

Cutting heat has significant effects on the machined surface integrity of titanium alloys in the aerospace field. Many unwanted problems such as surface burning, work hardening, and tool wear can be induced by high cutting temperatures. Therefore, it is necessary to accurately predict the cutting temperature of titanium alloys. In this paper, an improved analytical model of the cutting temperature in orthogonal cutting of titanium alloys is proposed based on the Komanduri-Hou model and the Huang-Liang model. The temperatures at points in a cutting tool, chip, and workpiece are calculated by using the moving heat source method. The tool relief angle is introduced into the proposed model, and imaginary mirrored heat sources of the shear plane heat source and the frictional heat source are applied to calculate the temperature rise in a semi-infinite medium. The heat partition ratio along the tool-chip interface is determined by the discretization method. For validation purpose, orthogonal cutting of titanium alloy Ti6Al4V is performed on a lathe by using a sharp tool. Experimental results show to be consistent well with those of the proposed model, yielding a relative difference of predicted temperature from 0.49% to 9.00%. The model demonstrates its ability of predicting cutting temperature in orthogonal cutting of Ti6Al4V. (C) 2019 Chinese Society of Aeronautics and Astrona Lincs. Production and hosting by Elsevier Ltd.