Advanced chromium carbide-based hardfacings

被引：89
作者：
Zikin, A. [1 ,2 ]
Hussainova, I. [2 ]
Katsich, C. [1 ]
Badisch, E. [1 ]
Tomastik, C. [1 ]
机构：
[1] AC2T Res GmbH, A-2700 Wiener Neustadt, Austria
[2] TUT, Dept Mat Engn, EE-19086 Tallinn, Estonia
来源：
SURFACE & COATINGS TECHNOLOGY | 2012年 / 206卷 / 19-20期
关键词：
PTA; Hardfacing; Cr3C2-Ni; Nanoindentation; High temperature wear; Tribology; THERMAL SPRAY COATINGS; WEAR MECHANISMS; CERMETS; EROSION; MICROSTRUCTURE; TEMPERATURE; CR3C2-NICR; ABRASION; PERFORMANCE; BEHAVIOR;
D O I：
10.1016/j.surfcoat.2012.04.039
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ceramic metal composite powders are widely used in thermal spray technologies; however, application of such hardphases in cladding systems has not been strongly developed yet. In the present study, two different hardfacings produced by the plasma transferred arc (PTA) process were analysed and compared to reveal differences between NiCrBSi coatings reinforced with standard chromium carbide and chromium-based cermet powders. The coatings were produced from a mixture of hardphases (Cr3C2 or Cr3C2-Ni) and nickel based powder with a ratio of 40/60 vol.%. The coatings' thickness was set to 2-2.5 mm on an austenite substrate. Hardfacings were characterised in terms of their microstructures, mechanical properties and impact-abrasion wear resistance at room and elevated temperatures. The manufactured Cr3C2-Ni reinforced hardfacing alloy has shown promising microstructural features with a low level of carbide dissolution and high temperature wear performance. (c) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码：4270 / 4278
页数：9
相关论文
共 50 条
[41]   Fabrication of chromium carbide cermets by electric resistance sintering process: Processing, microstructure and mechanical properties [J].
Lagos, M. A. ;
Agote, I. ;
Leizaola, I. ;
Lopez, D. ;
Calero, J. A. .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021, 95
[42]   Review of Preparation, Performance, and Application of Chromium-Carbide-Based Cermets [J].
Zhai, Wenyan ;
Wei, Yujing ;
Sun, Liang ;
Lv, Jiaao .
COATINGS, 2025, 15 (04)
[43]   Fabrication of novel silicon carbide-based nanomaterials with unique hydrophobicity and microwave absorption property [J].
Zhong, Bo ;
Zhang, Jinze ;
Wang, Hanqun ;
Xia, Long ;
Wang, Chunyu ;
Zhang, Xiaodong ;
Huang, Xiaoxiao ;
Wen, Guangwu .
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2020, 17 (06) :2598-2611
[44]   Tungsten carbide-based anodes for solid oxide fuel cells: Preparation, performance and challenges [J].
Torabi, Alireza ;
Etsell, Thomas H. .
JOURNAL OF POWER SOURCES, 2012, 212 :47-56
[45]   The Effects of Carbide Characteristics on the Performance of Tungsten Carbide-Based Composite Overlays, Deposited by Plasma-Transferred Arc Welding [J].
G. Fisher ;
T. Wolfe ;
K. Meszaros .
Journal of Thermal Spray Technology, 2013, 22 :764-771
[46]   The Effects of Carbide Characteristics on the Performance of Tungsten Carbide-Based Composite Overlays, Deposited by Plasma-Transferred Arc Welding [J].
Fisher, G. ;
Wolfe, T. ;
Meszaros, K. .
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2013, 22 (05) :764-771
[47]   Permeability behavior of silicon carbide-based membrane and performance study for oily wastewater treatment [J].
Das, Dulal ;
Kayal, Nijhuma ;
Marsola, Gabriel Antonio ;
Damasceno, Leonardo Augusto ;
de Mello Innocentini, Murilo Daniel .
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2020, 17 (03) :893-906
[48]   An overview of tensile and shear failure mechanisms of silicon carbide-based ceramic matrix composites [J].
Li, Xuqin ;
Pan, Kunming ;
Zhang, Fengchun ;
Jiang, Xinru ;
Liu, Jiangyu ;
Zhang, Jiaoyang ;
Zhang, Yi ;
Liu, Chidong ;
Zhang, Litong ;
Cheng, Laifei .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 :2924-2933
[49]   Preparation of Niobium Carbide-Based High-Temperature Ceramics by Direct Niobium Carburization [J].
Kochanov, G. P. ;
Rogova, A. N. ;
Kovalev, I. A. ;
Shevtsov, S., V ;
Sitnikov, A., I ;
Kostyuchenko, A., V ;
Klimaev, S. N. ;
Ashmarin, A. A. ;
Strel'nikova, S. S. ;
Chernyavskii, A. S. ;
Solntsev, K. A. .
INORGANIC MATERIALS, 2021, 57 (10) :1077-1082
[50]   Synthesis, characterization and microstructure of tantalum carbide-based ceramics by liquid polymeric precursor method [J].
Lu, Yan ;
Ye, Li ;
Han, Weijian ;
Sun, Yanan ;
Qiu, Wenfeng ;
Zhao, Tong .
CERAMICS INTERNATIONAL, 2015, 41 (09) :12475-12479
12345