A composite structure multi-parameter sensor based on an embedded fiber grating

被引：0

作者：

Zhan, Ya Ge ^{[1
]}

Luo, Jun ^{[1
]}

Wu, Hua ^{[1
]}

机构：

[1] Donghua Univ, State Key Lab Modificat Chem Fibers & Polymer Mat, Shanghai 201602, Peoples R China

来源：

MATERIALS PROCESSING TECHNOLOGY, PTS 1-3 | 2012年 / 418-420卷

关键词：

Fiber Bragg grating; polarization maintaining fiber grating; temperature; load; SMART COMPOSITES;

D O I：

10.4028/www.scientific.net/AMR.418-420.159

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A composite structure multi-parameter sensor based on an embedded polarization maintaining fiber grating (PMFG) has been studied theoretically and experimentally. A fiber Bragg grating (FBG, for comparison with the PMFG) and a PMFG are embedded in glass fiber reinforced polymer (GFRP) laminates in the experiment. The temperature and stress response characteristics of the fiber gratings embedded in corresponding GFRP are studied. The temperature sensitivity of the FBG improves from 10.64pm/degrees C to 21.66pm/degrees C. The temperature sensitivity of the PMFG improves from 10.22m/degrees C to 15.7pm/degrees C (x-axis) and from 9.56 pm/degrees C to15.1 pm/degrees C (y-axis). The peak wavelengths in the reflection spectra of the two gratings all shift linearly with the temperature and/or the stress of GFRP. The two temperature-wavelength sensitivities and the two stress-wavelength sensitivities of the PMFG are all different with each other. The temperature and the stress of the GFRP can be calculated according to the two peak wavelength (in x-axis and in y-axis) shifts of a PMFG. Therefore, one PMFG is component for monitoring the temperature and the stress of a composite structure simultaneously according to the experimental results.

引用

页码：159 / 164

页数：6

共 10 条

[1]

Bucholt Z.F., 1994, ELECTRON LETT, V12, P122

[2]

Dwyer M.J., 1998, MEAS SCI TECHNOL, V9, P1153

[3]

Jia Z. A., 2003, OPTOELECTRONIC LASER, V14, P453

[4] On the processing and evaluation of pultruded smart composites [J].

Kalamkarov, AL ;

Fitzgerald, SB ;

MacDonald, DO ;

Georgiades, AV .

COMPOSITES PART B-ENGINEERING, 1999, 30 (07) :753-763

[5] Measurement of process-induced strains in composite materials using embedded fiber optic sensors [J].

Lawrence, CM ;

Nelson, DV ;

Spingarn, JR ;

Bennett, TE .

SMART STRUCTURES AND MATERIALS 1996: SMART SENSING, PROCESSING, AND INSTRUMENTATION, 1996, 2718 :60-68

[6] Real-time cure monitoring of smart composite materials using extrinsic Fabry-Perot interferometer and fiber Bragg grating sensors [J].

Leng, JS ;

Asundi, A .

SMART MATERIALS & STRUCTURES, 2002, 11 (02) :249-255

[7] Cure monitoring of smart composites using Fiber Bragg Grating based embedded sensors [J].

Murukeshan, VM ;

Chan, PY ;

Ong, LS ;

Seah, LK .

SENSORS AND ACTUATORS A-PHYSICAL, 2000, 79 (02) :153-161

[8] Development of smart composite structures with small-diameter fiber Bragg grating sensors for damage detection: Quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing [J].

Takeda, N ;

Okabe, Y ;

Kuwahara, J ;

Kojima, S ;

Ogisu, T .

COMPOSITES SCIENCE AND TECHNOLOGY, 2005, 65 (15-16) :2575-2587

[9]

Wang T. J., 1994, POLYM COMPOSITE, V15, P2978

[10]

Wu Z.J., 2004, COMPOSITES, V21, P82

← 1 →