Influence of surface treatment of glass fibres on the dynamic mechanical properties of epoxy resin composites

被引：104
|
作者：
Keusch, S [1 ]
Haessler, R [1 ]
机构：
[1] Inst Polymer Res, D-01069 Dresden, Germany
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 1999年 / 30卷 / 08期
关键词：
fibres; thermosetting resin; interface interphase; dynamic mechanical testing;
D O I：
10.1016/S1359-835X(99)00007-X
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study the influence of the interface of differently treated glass fibres in epoxy resin composites is investigated by dynamic mechanical analysis. These results are compared with mechanical measurements of adhesion. It is found that the flexural storage modulus E' of the composites with improved interfacial bonding is increased over the whole investigated temperature range. Decrease of the magnitude of tan delta at the alpha-relaxation associates with an improvement of interfacial bonding too. The behaviour differences can only be attributed to interfacial phenomena because all other parameters were kept constant. The dynamic mechanical analysis is an additional possibility for quantifying interfacial interactions. (C) 1999 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：997 / 1002
页数：6
相关论文
共 50 条
  • [1] Study on dynamic and static mechanical properties of glass beads/epoxy resin composites
    Liu X.
    Yuan Y.
    Qu J.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2023, 40 (07): : 3874 - 3880
  • [2] The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites
    Milutinovic-Nikolic, A
    Presburger-Ulnikovic, V
    Velickovic, S
    Aleksic, R
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2003, 14 (02) : 75 - 79
  • [3] The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites
    Aleksandra Milutinović-Nikolić
    Vladanka Presburger-Ulniković
    Sava Veličković
    Radoslav Aleksić
    Journal of Materials Science: Materials in Electronics, 2003, 14 : 75 - 79
  • [4] Influence of Kenaf on Mechanical Properties of Glass Epoxy Composites
    Joshi, Anant
    Gouda, P. S. Shivakumar
    Savanur, Santosh
    Uppin, Vinayak
    Veereshkumar, G. B.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2018), 2019, 577
  • [5] Mechanical Properties of Bio-Composites Based on Epoxy Resin and Nanocellulose Fibres
    Roszowska-Jarosz, Martyna
    Masiewicz, Joanna
    Kostrzewa, Marcin
    Kucharczyk, Wojciech
    Zurowski, Wojciech
    Kucinska-Lipka, Justyna
    Przybylek, Pawel
    MATERIALS, 2021, 14 (13)
  • [6] Epoxy resin composites with surface modified aramid fibres
    Rallis, G.
    Tarantili, P.A.
    Andreopoulos, A.G.
    2000, Adcotec Ltd. (09)
  • [7] Epoxy resin composites with surface modified aramid fibres
    Rallis, G
    Tarantili, PA
    Andreopoulos, AG
    ADVANCED COMPOSITES LETTERS, 2000, 9 (02) : 127 - 133
  • [8] Mechanical properties of glass fiber composites with an epoxy resin modified by a liquid crystalline epoxy
    Punchaipetch, P
    Brostow, W
    D'Souza, NA
    Jaklewwicz, M
    Montemartini, P
    Smith, JT
    ANTEC 2000: SOCIETY OF PLASTICS ENGINEERS TECHNICAL PAPERS, CONFERENCE PROCEEDINGS, VOLS I-III, 2000, : 2319 - 2323
  • [9] Mechanical properties of glass fiber composites with an epoxy resin modified by a liquid crystalline epoxy
    Punchaipetch, P
    D'Souza, NA
    Brostow, W
    Smith, JT
    POLYMER COMPOSITES, 2002, 23 (04) : 564 - 573
  • [10] Effect of surface treatment and stacking sequence on mechanical properties of basalt/glass epoxy composites
    Raajeshkrishna, C. R.
    Chandramohan, P.
    Saravanan, D.
    POLYMERS & POLYMER COMPOSITES, 2019, 27 (04): : 201 - 214
12345