Study of the Metal Properties and Structure of a Large Shell Made of 15Kh2MFA Steel

被引：2

作者：

Teplukhina, I. V. ^{[1
]}

Bogdanov, V. I. ^{[1
]}

Zaitseva, O. Yu. ^{[1
]}

Shamrai, E. L. ^{[1
]}

Tsvetkov, A. S. ^{[2
]}

机构：

[1] Natl Res Ctr Kurchatov Inst, Prometey Cent Res Inst Struct Mat TsNII KM Promet, St Petersburg, Russia

[2] Peter Great St Petersburg Polytech Univ, St Petersburg, Russia

来源：

METALLURGIST | 2018年 / 61卷 / 9-10期

关键词：

mechanical properties; structure; different grain size; large workpiece; manufacturing technology; critical brittleness temperature; bainite; impact strength; ELECTRON BACKSCATTER DIFFRACTION; GRAIN-SIZE; MICROSTRUCTURES; EBSD;

D O I：

10.1007/s11015-018-0565-6

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Mechanical properties and structure are studied for metal of a large test workpiece of steel 15Kh2MFA-A mod.B with a wall thickness under heat treatment of 670 mm. Special attention is devoted to studying the grain structure since the amount of austenitic grains, in particular, grain size, have a significant effect on impact strength and critical brittleness temperature, i.e., important properties for reactor body workpiece metal quality. A unique combination is obtained for strength properties and brittle failure resistance of workpieces for water-water reactor (VVER) bodies. The possibility is demonstrated of significant expansion with respect to thickness of the existing range of reactor vessel workpiece bodies made of steel of type 15Kh2MFA with provision of a required set of mechanical properties laid down by existing technical documentation for a workpiece of smaller thickness, which creates the possibility of planning and preparation of contemporary VVER with increased safety during operation and an ultra long life.

引用

页码：787 / 793

页数：7

共 16 条

[1] [Даниленко В.Н. Danilenko V.N.], 2012, [Заводская лаборатория. Диагностика материалов, INORGANIC MATERIALS English translation of selected articles from Zavodskaya Laboratoriya. Diagnostika Materialov, Zavodskaya laboratoriya. Diagnostika materialov], V78, P28
[2] A comparison of grain size determination by light microscopy and EBSD analysis
Gao, N
Wang, SC
Ubhi, HS
Starink, MJ
[J]. JOURNAL OF MATERIALS SCIENCE, 2005, 40 (18) : 4971 - 4974
[3] Grekovo I. I., 2004, Patent, Patent No. [2235791 RF, 2235791]
[4] Characterisation of fine-scale microstructures by electron backscatter diffraction (EBSD)
Humphreys, FJ
[J]. SCRIPTA MATERIALIA, 2004, 51 (08) : 771 - 776
[5] Review - Grain and subgrain characterisation by electron backscatter diffraction
Humphreys, FJ
[J]. JOURNAL OF MATERIALS SCIENCE, 2001, 36 (16) : 3833 - 3854
[6] Kachanov N. N., 1978, STEEL HARDENABILITY
[7] Materials Science Aspects of Operational Safety Enhancement of Advanced VVER Based on Vessel Steel Improvements
Karzov, G. P.
Margolin, B. Z.
Teplukhina, I. V.
Piminov, V. A.
[J]. ATOMIC ENERGY, 2016, 121 (01) : 29 - 42
[8] [Карзов Г.П. Karzov G.P.], 2012, [Вопросы материаловедения, Voprosy materialovedeniya], P74
[9] Knap M., 2009, RMZ MAT GEOENVIR, V56, P108
[10] Mengaroni S., 2016, J. Mater. Sci. Eng, V6, P105

← 1 2 →