Whisker behaviors and tool wear in cutting of unidirectional SiC whisker-reinforced plastic

被引：8
作者：
Afaghani, JED [1 ]
Yamaguchi, K [1 ]
Horaguchi, I [1 ]
Nakamoto, T [1 ]
机构：
[1] TOYOTA COLL TECHNOL, TOYOTA, AICHI, JAPAN
来源：
WEAR | 1996年 / 195卷 / 1-2期
关键词：
cutting; silicon carbide whisker; orientation; plastic composite; polycrystalline diamond; grain size; tool;
D O I：
10.1016/0043-1648(96)06953-0
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This study concerns the cutting process of unidirectional SiC whisker-reinforced plastic composite. The effects of the grain size of the polycrystalline diamond tool and the SiC whisker orientation on the tool wear were investigated. The tool with fine grain size exhibited higher wear rates. The greatest tool wear was with the composite having longitudinal, alignment of whiskers. The cutting processes of various orientations of whiskers were observed by scanning electron microscopy at low speed using a specially designed device. Moreover, models were proposed for cutting the SiC whisker-plastic composite and for wear of sintered diamond tools.
引用
收藏
页码：223 / 231
页数：9
相关论文
共 27 条
  • [1] BILLMAN ER, 1988, AM CERAM SOC BULL, V67, P1016
  • [2] HOT ISOSTATICALLY PRESSED ALUMINA SILICON CARBIDE-WHISKER COMPOSITES
    BJORK, L
    HERMANSSON, LAG
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1989, 72 (08) : 1436 - 1438
  • [3] Brandt G., 1990, Journal of the European Ceramic Society, V6, P273, DOI 10.1016/0955-2219(90)90019-C
  • [4] CHOKSHI AH, 1988, STRENGTH METALS ALLO, V1, P301
  • [5] GADKAREE KP, 1986, AM CERAM SOC BULL, V65, P370
  • [6] Grewe H., 1987, CFI - Ceramic Forum International - Berichte der Deutschen Keramischen Gesellschaft, V64, p303, 306
  • [7] GREWE H, 1987, CFI-CERAM FORUM INT, V64, P313
  • [8] GREWE H, 1987, CFI-CERAM FORUM INT, V64, P306
  • [9] Hayami R., 1991, Advanced Structural Inorganic Composites. Proceedings of the Satellite Symposium 2 on Advanced Structural Inorganic Composites of the 7th International Meeting on Modern Ceramics Technologies (7th CIMTEC - World Ceramics Congress), P453
  • [10] HAYAMI R, 1986, P 21 U C CER SCI U P, P663
123