Structure-Property Relationships in Heterophasic Thermoplastic Elastomers Filled with Montmorillonite

被引:2
作者
Causin, Valerio [1 ,2 ]
Marega, Carla [1 ,2 ]
Saini, Roberta [1 ,2 ]
Neppalli, Ramesh [1 ,2 ]
Ferrara, Giuseppe [3 ]
Adhikari, Rameshwar [4 ]
Marigo, Antonio [1 ,2 ]
机构
[1] Univ Padua, Dipartimento Sci Chim, I-35131 Padua, Italy
[2] INSTM Res Unit, I-35131 Padua, Italy
[3] LyondellBasell Poliolefine Italia SpA, Ctr Ric Giulio Natta, I-44100 Ferrara, Italy
[4] Tribhuvan Univ, Cent Dept Chem, Kathmandu 44613, Nepal
关键词
Heterophasic Thermoplastic Elastomers; Nanocomposites; Montmorillonite; NONISOTHERMAL CRYSTALLIZATION BEHAVIOR; INJECTION-MOLDED SAMPLES; TPO-BASED NANOCOMPOSITES; CO-PROPYLENE BLENDS; MECHANICAL-PROPERTIES; ISOTACTIC POLYPROPYLENE; SHISH-KEBAB; ISOTHERMAL CRYSTALLIZATION; SILICATE NANOCOMPOSITES; POLYMER NANOCOMPOSITES;
D O I
10.1166/jnn.2012.5166
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Polypropylene (PP)/ethylene-propylene rubber (EPR)/Montmorillonite ternary nanocomposites with a phase separated morphology were studied in this work. Wide angle X-ray diffraction (WAXD), small angle X-ray scattering (SAXS), atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to investigate the samples. One of the aim of this work was to separate the effects of rubber and clay content on the structure, morphology and mechanical properties of the samples. The presence of clay favored the formation of gamma phase and disrupted the lamellar framework. Clay had moreover a major role in shaping the phase separated morphology of the samples. Atomic Force Microscopy showed that the shear exerted by the clay layers was key for inducing a shish kebab morphology in the polymer matrix. Rubber content decreased the degree of crystallinity at a crystalline cell level and induced the formation of a double population of lamellar stacks. The mechanical properties of the samples primarily depended on rubber content, and they were secondarily tuned by the effect of clay. This synergistic effect allowed to obtain composites with increased stiffness, ductility and toughness, oppositely to what is frequently found.
引用
收藏
页码:1859 / 1870
页数:12
相关论文
共 56 条
[1]   Thermal and mechanical properties of EPDM/PP plus thermal shock-resistant ceramic composites [J].
Brostow, Witold ;
Datashvili, Tea ;
Geodakyan, James ;
Lou, Jesse .
JOURNAL OF MATERIALS SCIENCE, 2011, 46 (08) :2445-2455
[2]   Structure and morphology of solution blended poly(vinylidene fluoride)/montmorillonite nanocomposites [J].
Causin, Valerio ;
Carraro, Massimo L. ;
Marega, Carla ;
Saini, Roberta ;
Campestrini, Sandro ;
Marigo, Antonio .
JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 109 (04) :2354-2361
[3]  
Causin V, 2008, J NANOSCI NANOTECHNO, V8, P1823, DOI [10.1166/jnn.2008.0031823, 10.1166/jnn.2008.003]
[4]  
Causin V, 2008, J NANOSCI NANOTECHNO, V8, P1790, DOI 10.1166/jnn.2008.028
[5]   Morphology, structure and properties of a poly(1-butene)/montmorillonite nanocomposite [J].
Causin, Valerio ;
Marega, Carla ;
Marigo, Antonio ;
Ferrara, Giuseppe ;
Idiyatullina, Gulnaz ;
Fantinel, Fabiana .
POLYMER, 2006, 47 (13) :4773-4780
[6]   Nucleation, structure and lamellar morphology of isotactic polypropylene filled with polypropylene-grafted multiwalled carbon nanotubes [J].
Causin, Valerio ;
Yang, Bing-Xing ;
Marega, Carla ;
Goh, Suat Hong ;
Marigo, Antonio .
EUROPEAN POLYMER JOURNAL, 2009, 45 (08) :2155-2163
[7]   Morphological and structural characterization of polypropylene/conductive graphite nanocomposites [J].
Causin, Valerlo ;
Marega, Carla ;
Marigo, Antonio ;
Ferrara, Giuseppe ;
Ferraro, Angelo .
EUROPEAN POLYMER JOURNAL, 2006, 42 (12) :3153-3161
[8]   Isotactic polypropylene/ethylene-co-propylene blends: effects of the copolymer microstructure and content on rheology, morphology and properties of injection moulded samples [J].
D'Orazio, L ;
Mancarella, C ;
Martuscelli, E ;
Cecchin, G ;
Corrieri, R .
POLYMER, 1999, 40 (10) :2745-2757
[9]   Isotactic polypropylene/ethylene-co-propylene blends:: effects of composition on rheology, morphology and properties of injection moulded samples [J].
D'Orazio, L ;
Cecchin, G .
POLYMER, 2001, 42 (06) :2675-2684
[10]   Organoclays: Properties, preparation and applications [J].
de Paiva, Lucilene Betega ;
Morales, Ana Rita ;
Valenzuela Diaz, Francisco R. .
APPLIED CLAY SCIENCE, 2008, 42 (1-2) :8-24