Study on SLM manufacturing of teeth used for dental tools testing

被引：12

作者：

Buican, George Razvan ^{[1
]}

Oancea, Gheorghe ^{[1
]}

Martins, Rui F. ^{[2
]}

机构：

[1] Transilvania Univ Brasov, Fac Technol Engn & Ind Management, Dept Mfg Engn, Mihai Viteazu 5, Brasov, Romania

[2] Univ Nova Lisboa, Fac Sci & Technol, UNIDEMI, Campus Caparica, P-2829516 Caparica, Portugal

来源：

4TH INTERNATIONAL CONFERENCE ON COMPUTING AND SOLUTIONS IN MANUFACTURING ENGINEERING 2016 - COSME'16 | 2017年 / 94卷

关键词：

D O I：

10.1051/matecconf/20179403002

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this article are studied the possibilities of manufacturing human teeth using the Selective Laser Melting (SLM) process. The human teeth are a biological construction, and because of this, they have a very complex structure with external and internal complex surfaces, unique for each person. To manufacture such structures, even using additive technologies, it is important to find the right manufacturing strategy. In this study are presented three strategies to manufacture the first molar using a SLM process and ANSI 316 L stainless steel as the building material. The best strategy to manufacture the teeth is chosen, and once build they can be used to test dental tools.

引用

页数：10

共 11 条

[1]

Buican George-Razvan, 2015, Applied Mechanics and Materials, V809-810, P369, DOI 10.4028/www.scientific.net/AMM.809-810.369

[2]

Buican George Razvan, 2015, Applied Mechanics and Materials, V760, P515, DOI 10.4028/www.scientific.net/AMM.760.515

[3]

Buican George Razvan, 2014, Applied Mechanics and Materials, V693, P285, DOI 10.4028/www.scientific.net/AMM.693.285

[4]

Cosma S.C., 2015, ACAD J MANUFACTURING, V13, P24

[5] Digital manufacturing of air-cooled single-cylinder engine block [J].

Haba, Sever Alexandru ;

Oancea, Gheorghe .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 80 (5-8) :747-759

[6] Identifying multiplanar root canal curvatures using stainless-steel instruments [J].

Jerome, CE ;

Hanlon, RJ .

JOURNAL OF ENDODONTICS, 2003, 29 (05) :356-358

[7] Customized implants with specific properties, made by selective laser melting [J].

Leordean, Dan ;

Dudescu, Cristian ;

Marcu, Teodora ;

Berce, Petru ;

Balc, Nicolae .

RAPID PROTOTYPING JOURNAL, 2015, 21 (01) :98-104

[8]

Muresan S. C., 2012, THESIS

[9]

Pacurar R, 2011, AIP CONF PROC, V1353, P1385, DOI [10.1063/1.3590470, 10.1063/1.3589710]

[10] Study of mechanical properties of AISI 316 stainless steel processed by "selective laser melting", following different manufacturing strategies [J].

Tolosa, Itziar ;

Garciandia, Fermin ;

Zubiri, Fidel ;

Zapirain, Fidel ;

Esnaola, Aritz .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 51 (5-8) :639-647

← 1 2 →