Development and characterization of new shape-stabilized phase change material (PCM)-Polymer including electrical arc furnace dust (EAFD), for acoustic and thermal comfort in buildings

被引：44

作者：

Barreneche, Camila ^{[1
,2
]}

Ines Fernandez, A. ^{[1
]}

Niubo, Maria ^{[1
]}

Chimenos, Jose M. ^{[1
]}

Espiell, Ferran ^{[1
]}

Segarra, Merce ^{[1
]}

Sole, Cristian ^{[2
]}

Cabeza, Luisa F. ^{[2
]}

机构：

[1] Univ Barcelona, Dept Ciencia Mat & Ingn Met, E-08028 Barcelona, Spain

[2] Univ Lleida, GREA Innovacio Concurrent, Lleida 25001, Spain

来源：

ENERGY AND BUILDINGS | 2013年 / 61卷

关键词：

Thermal energy storage (TES); Phase change materials (PCM); Electrical arc furnace dust (EAFD); Polymeric matrix; Acoustic properties; Thermophysical properties; Tensile strength properties; ENERGY STORAGE;

D O I：

10.1016/j.enbuild.2013.02.026

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Energy consumption for thermal comfort in buildings reached 20-40% of total energy consumption in the developed countries. This study evaluates the performance of a composite material with enhanced thermal inertia formulated with a solid waste to be used in buildings. The feasibility of incorporating electric arc furnace dust (EAFD) was evaluated. EAFD is a special waste used as filler in a polymer matrix. Paraffin wax is added with two functions: on one side as lubricant agent to promote a correct mixing between the inorganic filler and the polymeric matrix. Moreover, paraffin acts as phase change material (PCM) due to their high thermal energy storage (TES) capacity as latent heat from the phase change. In order to evaluate the performance as part of building systems of new material developed in this paper, several composite formulations were prepared and tensile strength test were performed, the thermal properties were analyzed by differential scanning calorimetry (DSC) and airborne noise acoustic properties were tested using an experimental cabin based on the UNE-EN-ISO140. The results were compared with a commercial material for acoustic insulation in constructive solutions. The material developed was a 3 mm dense sheet able to be used in combination with other materials as constructive systems. (c) 2013 Elsevier B.V. All rights reserved.

引用

页码：210 / 214

页数：5

共 20 条

[1] A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) [J].