Synthesis and characterization of Dy3+ doped zinc-lead-phosphate glass

Dysprosium doped-zinc-lead-phosphate glasses having composition (60 - x) P2O5-20PbO-20ZnO-xDy(2)O(3) where x = 0, 0.5, 1.0, and 3.0 mol% were prepared by melt quenching technique. Archimedes method was used to measure their densities that are used to calculate the molar volumes. The values of densities lie in the range 3.58-3.74 gm/cm(3) whereas those of molar volume lie in the range of 40.80-41.10 cm(-3). The UV-VIS-NIR absorption spectroscopy in the wavelength range 300-1400 nm was carried out. Absorption spectra consist of eight absorption peaks corresponding to the transitions from the H-6(15/2) ground state to various excited energy levels. Judd-Ofelt analysis of Dy3+ doped zinc-lead-phosphate is also accomplished. The energy band gap measured from the optical absorbance found to be in the range of 4.50-4.68 eV and 4.21-4.50 eV for direct and indirect transitions respectively. The IR spectra reveal the significant structural changes inside the glass induced by modifiers lead oxide and zinc oxide, explained in terms of the distortion of PO4 tetrahedra and network depolymerization process. Differential thermal analysis confirms the glass stability in the presence of Dy3+ ions. In addition, photoluminescence spectra shows three prominent emission bands centered at 475, 586 and 675 nm corresponds to the F-4(9/2) -> H-6(J) (J = 11/2, 13/2, 15/2) transitions respectively and the intensity of all the bands are enhanced as the concentration of Dy3+ ions increased. (C) 2013 Elsevier B.V. All rights reserved.