The effects of neodymium addition on the intermetallic microstructure and mechanical properties of Al-7Si-0.3Mg-0.3Fe alloys

被引:32
作者
Tang, Qi [1 ]
Zhao, Jianhua [1 ,2 ]
Wang, Tao [1 ]
Chen, Jing [1 ]
He, Ke [1 ]
机构
[1] Chongqing Univ, Coll Mat Sci & Engn, State Key Lab Mech Transmiss, Chongqing 400044, Peoples R China
[2] Natl Engn Res Ctr Magnesium Alloys, Chongqing 400044, Peoples R China
关键词
Aluminium alloys; Neodymium addition; Casting; Iron-rich intermetallics; Mechanical properties; AL-SI ALLOYS; A356; ALUMINUM-ALLOYS; RARE-EARTH-ELEMENTS; MG CASTING ALLOYS; TENSILE PROPERTIES; HEAT-TREATMENT; EUTECTIC MODIFICATION; EU ADDITION; ND; BEHAVIOR;
D O I
10.1016/j.jallcom.2018.01.138
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The effects of neodymium (Nd) addition (0, 0.03, 0.06 and 0.09 wt.%) on the intermetallic microstructure and mechanical properties of Al-7Si-0.3Mg-0.3Fe (wt.%) alloys were investigated in this study. The microstructures of the intermetallic compounds in the alloys were observed by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The Nd-rich particles gradually coarsened with increase of Nd addition and attached to the beta-AlFeSi phase surface. Besides, the larger Nd-rich particles in the alloys decreased in size and became spherical after T6 heat treatment. In addition, the Nd addition could influence the amount of the pi-AlSiMgFe phase by affecting the undercooling of the quaternary eutectic reaction (Liq. -> Al + Si + Mg2Si + Al8FeMg3Si6). The amount of the pi-AlSiMgFe phase increased when a little (0.03 wt.%) Nd was added, however with the further increasing Nd content, the larger Nd-rich particles often tightly attached on the beta-AlFeSi phase surface and reduced the amount of the pi-AlSiMgFe phase. Furthermore, the 0.03Nd as-cast alloy had the optimal conditions for the formation of the pi-AlSiMgFe and the spherical Nd-rich particles with the ultimate tensile strength about 302 MPa and elongation about 3.1% after T6 heat treatment. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码:161 / 173
页数:13
相关论文
共 42 条
[41]   Effects of cooling rate on solution heat treatment of as-cast A356 alloy [J].
Yang, Chang-lin ;
Li, Yuan-bing ;
Dang, Bo ;
Lue, He-bin ;
Liu, Feng .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2015, 25 (10) :3189-3196
[42]   Effect of Cr content and heat-treatment on the high temperature strength of eutectic Al-Si alloys [J].
Yang, Yuying ;
Zhong, Sheng-Yi ;
Chen, Zhe ;
Wang, Mingliang ;
Ma, Naiheng ;
Wang, Haowei .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 647 :63-69