Accuracy and noise analyses of 3D vibration measurements using laser Doppler vibrometer

The in-plane and out-of-plane vibration components are used for 3D vibration measurements. The latter can be calculated by using three laser scanning vibrometers (LSVs) or by moving a single LSV to three different locations. These vibration components are calculated from the vibration signals measured at each of the three locations and the angles between the local coordinates and the LSV locations. The accuracy of the in-plane and out-of-plane vibration components can be degraded depending on the measurement angle. In addition to accuracy, the noise contained in the LSV can be amplified depending on the measurement angle. Hence, it is necessary to implement an analysis methodology for the angles, which is conducted for 2D vibration measurements first before extended to 3D. Finally, experiments are performed for both 2D and 3D at small and appropriate angles, and the elicited results are compared to those elicited using a 3D accelerometer. (C) 2016 Elsevier Ltd. All rights reserved.