Studies on cutting forces in high speed drilling of CFRP

被引：0

作者：

Zhang, HJ ^{[1
]}

Chen, WY ^{[1
]}

Fan, R ^{[1
]}

Chen, DC ^{[1
]}

Ding, ZL ^{[1
]}

机构：

[1] Beijing Univ Aeronaut & Astronaut, Beijing 100083, Peoples R China

来源：

PROGRESS OF CUTTING AND GRINDING: WITH SOME TOPICS IN ADVANCED MANUFACTURE TECHNOLOGY | 1998年

关键词：

carbon fibre reinforced plastic (CFRP); high speed drilling; thrust forces; torque;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The cutting forces are investigated when high speed drilling on multi-directional CFRP The relationships between cutting parameters and thrust force/torque are established. While the spindle speed n (rpm), feed speed v(f)(mm/min) and feed rate f (mm/rev) have significant influences on the cutting forces, the surface speed v (m/min) of the drill has little effect on the thrust and torque. The ratio v/v(f) has a steady influence on the cutting forces at variours v and v(f) combinations. The ratio can therefore be used in production to determine optimum drilling parameters.

引用

页码：55 / 59

页数：5