Refractory Wear Mechanisms in the Nonferrous Metal Industry: Testing and Modeling Results

被引：24

作者：

Gregurek, D. ^{[1
]}

Ressler, A. ^{[1
]}

Reiter, V. ^{[1
]}

Franzkowiak, A. ^{[2
]}

Spanring, A. ^{[2
]}

Prietl, T. ^{[2
]}

机构：

[1] TC Leoben, RHI AG, A-8700 Leoben, Austria

[2] RHI AG, A-1100 Vienna, Austria

来源：

JOM | 2013年 / 65卷 / 11期

关键词：

12;

D O I：

10.1007/s11837-013-0758-1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Nonferrous pyrometallurgical processes today operate at a high intensity requiring the best standards for the furnace refractory systems. From one plant to another, there is a range of process conditions such as temperature, slag chemistry, and feed types, and each of these parameters can influence refractory life. It is generally understood that process changes at plants can impact refractory life. The ability to test and understand refractory responses to a wide range of furnace operating conditions is therefore important. The RHI Technology Centre in Leoben, Austria is well equipped with laboratory and pilot plant facilities to evaluate refractory suitability over the range of conditions encountered in modern nonferrous pyrometallurgical systems. This article describes refractory testing at the RHI Technology Centre of the impact of two metallurgical slags on a number of different RHI test bricks. The slags were a fayalite slag and a calcium ferrite slag supplied by two smelter plants. High-temperature corrosion tests were carried out in a 250-mm-diameter induction furnace and a 165-mm-diameter short rotary kiln; each unit was lined with a number of refractory bricks and tested against attack by the particular slag. After testing, the refractory bricks were subjected to several laboratory tests to determine the extent of corrosion. Optimal refractory choices for the customers' plants were developed based on the test results.

引用

页码：1622 / 1630

页数：9

共 12 条

[1]

Barthel H., 1981, WEAR CHROME MAGNESIT, P250

[2]

Crundwell FK, 2011, EXTRACTIVE METALLURGY OF NICKEL, COBALT AND PLATINUM-GROUP METALS, P1

[3]

Davenport W. G, 2002, EXTRACTIVE METALLURG, P432

[4]

DEER WA, 1992, INTRO ROCK FORMING M, P3

[5]

Gregurek D., 2003, BULLETIN, V1, P17

[6]

Gregurek D., 2013, STATE ART REFRACTORY

[7]

Gregurek D., 2012, HIGH PERFORMANCE BRA

[8]

Harders F., 1960, FEUERFESTKUNDE HERST, P978

[9]

McCain J. D., 1994, CONVERTING FIRE REFI, P381

[10]

Pawlek F., 1983, METALLHUTTENKUNDE, P865

← 1 2 →