Potential of macroalgae for biodiesel production: Screening and evaluation studies

被引:72
作者
Abomohra, Abd El-Fatah [1 ,3 ]
El-Naggar, Amal Hamed [2 ,3 ]
Baeshen, Areej Ali [2 ]
机构
[1] Jiangsu Univ, Sch Energy & Power Engn, New Energy Dept, Nanjing 212013, Jiangsu, Peoples R China
[2] King Abdulaziz Univ, Sci Fac Girls, Dept Biol Sci, Jeddah 21589, Saudi Arabia
[3] Tanta Univ, Fac Sci, Dept Bot, Tanta 31527, Egypt
关键词
Biodiesel production; Wild macroalgae; Seaweeds harvest; Energy conversion; Fatty acid methyl esters; FATTY-ACID-COMPOSITION; FUEL PROPERTIES; CULTIVATION; BIOFUEL; FEEDSTOCK; SELECTION; SEAWEEDS; PROGRESS; STRAINS; ENERGY;
D O I
10.1016/j.jbiosc.2017.08.020
中图分类号
Q81 [生物工程学(生物技术)]; Q93 [微生物学];
学科分类号
071005 ; 0836 ; 090102 ; 100705 ;
摘要
Nowadays, biofuel production is a fast expanding industry and is facing a growing dilemma about a feedstock source capable of keeping up with demand. Recently, macroalgae have been attracting a wide attention as a source for biofuel. In the present study, ten macroalgae were collected and screened as biodiesel feedstocks. As a result of their high biomass production and relatively high lipid content, Ulva lactuca, Padina boryana and Ulva intestinalis showed the highest significant lipids and fatty acid methyl esters (FAMES) areal productivities among the studied species. Saturated fatty acids (SAFs) showed insignificant differences in the selected species, with noticeably significant higher polyunsaturated fatty acids (PUFAs) content in U. lactuca by 4.2 and 3 times, with respect to P. boryana and U. intestinalis, respectively. The recorded increase in PUFAs was attributed to higher content of C16:4n-3, C18:3n-3 and C18:4n-3. By lipid fractionation, P. boryana showed significant higher concentration of neutral lipids (37.7 mg g(-1) CDW, representing 46.7% of total fatty acids) in comparison to U. lactuca and U. intestinalis, which showed 16% and 17% lower neutral lipid fractions, respectively. In addition, biodiesel characteristics of the studied macroalgae complied with that of international standards. Furthermore, oil-free residual biomass can be readily converted into fermentable sugars or biogas due to its high carbohydrates content, which adds to the economics of macroalgae as biofuel feedstock. In conclusion, the present study confirmed that macroalgae represent an attractive alternative renewable feedstock for biodiesel and other biofuels, (C) 2017, The Society for Biotechnology, Japan. All rights reserved.
引用
收藏
页码:231 / 237
页数:7
相关论文
共 45 条
  • [1] Screening of marine microalgae isolated from the hypersaline Bardawil lagoon for biodiesel feedstock
    Abomohra, Abd El-Fatah
    El-Sheekh, Mostafa
    Hanelt, Dieter
    [J]. RENEWABLE ENERGY, 2017, 101 : 1266 - 1272
  • [2] Microalgal biomass production as a sustainable feedstock for biodiesel: Current status and perspectives
    Abomohra, Abd El-Fatah
    Jin, Wenbiao
    Tu, Renjie
    Han, Song-Fang
    Eid, Mohammed
    Eladel, Hamed
    [J]. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2016, 64 : 596 - 606
  • [3] Pilot cultivation of the chlorophyte microalga Scenedesmus obliquus as a promising feedstock for biofuel
    Abomohra, Abd El-Fatah
    El-Sheekh, Mostafa
    Hanelt, Dieter
    [J]. BIOMASS & BIOENERGY, 2014, 64 : 237 - 244
  • [4] Lipid and total fatty acid productivity in photoautotrophic fresh water microalgae: screening studies towards biodiesel production
    Abomohra, Abd El-Fatah
    Wagner, Martin
    El-Sheekh, Mostafa
    Hanelt, Dieter
    [J]. JOURNAL OF APPLIED PHYCOLOGY, 2013, 25 (04) : 931 - 936
  • [5] AIL S, 2017, BIORESOURCE TECHNOL, V238, P425
  • [6] Life cycle assessment of macroalgae cultivation and processing for biofuel production
    Aitken, Douglas
    Bulboa, Cristian
    Godoy-Faundez, Alex
    Turrion-Gomez, Juan L.
    Antizar-Ladislao, Blanca
    [J]. JOURNAL OF CLEANER PRODUCTION, 2014, 75 : 45 - 56
  • [7] Aleem AA, 1993, The marine algae of Alexandria, Egypt, V1st, P138
  • [8] [Anonymous], 1978, HDB PHYCOLOGICAL MET
  • [9] APHA, 1985, Standard Methods for the Examination of Water and Wastewater
  • [10] *ASTM I, 2008, D675108 ASTM INT