Influence of metal foam on heat transfer characteristics of refrigerant-oil mixture flow boiling inside circular tubes

被引:40
|
作者
Zhu, Yu [1 ]
Hu, Haitao [1 ]
Ding, Guoliang [1 ]
Sun, Shuo [1 ]
Jing, Yaolong [1 ,2 ]
机构
[1] Shanghai Jiao Tong Univ, Inst Refrigerat & Cryogen, Shanghai 200240, Peoples R China
[2] Carrier Corp, Prod Mkt, Shanghai 200001, Peoples R China
关键词
Flow boiling; Flow pattern; Heat transfer; Metal foam; Oil; HORIZONTAL TUBES; THERMAL-ANALYSIS; 2-PHASE FLOW; PART II; EXCHANGERS;
D O I
10.1016/j.applthermaleng.2012.06.045
中图分类号
O414.1 [热力学];
学科分类号
摘要
The influence of metal foam on heat transfer characteristics of refrigerant and oil mixture flow boiling inside circular tubes was experimentally investigated on two horizontal circular tubes filled with 5 PPI and 10 PPI copper foams, respectively. The experimental conditions include saturation pressure of 995 kPa, mass flux from 10 to 30 kg m(-2) s(-1), heat flux from 3.1 to 9.3 kW m(-2), inlet vapor quality from 0.175 to 0.775 and oil concentration from 0% to 5%. The experimental results reveal that metal foam enhances the flow boiling heat transfer coefficient of refrigerant by a maximum of 185%, while the enhancement effect of metal foam is weakened at oil presence conditions. A new correlation is developed, which can agree with 98% of the experimental data within a deviation of +/- 30%. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1246 / 1256
页数:11
相关论文
共 50 条
  • [21] Flow Characteristics of a Refrigerant-Oil Mixture in a Vapor Compression Heat Pump Heat Exchanger for Space Applications
    Ma Rui
    Ye Yilin
    Ma Xudong
    Wu Yuting
    Yan Suying
    Wang Feng
    JOURNAL OF THERMAL SCIENCE, 2022, 31 (02) : 407 - 416
  • [22] Flow Boiling Heat Transfer in Horizontal Metal-Foam Tubes
    Zhao, C. Y.
    Lu, W.
    Tassou, S. A.
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2009, 131 (12): : 1 - 8
  • [23] Two-phase flow heat transfer correlations for refrigerant - Oil mixture plows inside augmented tubes
    Usmani, GI
    Ravigururajan, TS
    JOURNAL OF ENHANCED HEAT TRANSFER, 1999, 6 (06) : 405 - 418
  • [24] Heat transfer enhancement by metal foam during nucleate pool boiling of refrigerant/oil mixture at a wide range of oil concentration
    Zhu, Yu
    Hu, Haitao
    Ding, Guoliang
    Zhuang, Dawei
    Peng, Hao
    HVAC&R RESEARCH, 2012, 18 (03): : 377 - 389
  • [25] Influence of Metal Foam on Flow Boiling Heat Transfer Characteristics of R141b Refrigerant in Parallel Small Channels
    Li H.
    Li Z.
    Zhang C.
    Yang Y.
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2020, 40 (17): : 5599 - 5608
  • [26] Influence of lubricant oil on heat transfer performance of refrigerant flow boiling inside small diameter tubes. Part I: Experimental study
    Wei, Wenjian
    Ding, Guoliang
    Hu, Haitao
    Wang, Kaijian
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2007, 32 (01) : 67 - 76
  • [27] Nucleate pool boiling heat transfer characteristics of refrigerant/oil mixture with diamond nanoparticles
    Zhuang, Da-Wei
    Peng, Hao
    Hu, Hai-Tao
    Ding, Guo-Liang
    Zhu, Yu
    Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2011, 45 (06): : 861 - 865
  • [28] Comparison of flow boiling heat transfer characteristics inside different enhanced heat transfer tubes
    Tang W.-Y.
    Chen J.-X.
    Han J.-C.
    He Y.
    Li W.
    Liu Z.-C.
    Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2018, 52 (06): : 1216 - 1222
  • [29] Nucleate pool boiling heat transfer characteristics of refrigerant/oil mixture with diamond nanoparticles
    Peng, Hao
    Ding, Guoliang
    Hu, Haitao
    Jiang, Weiting
    Zhuang, Dawei
    Wang, Kaijian
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2010, 33 (02): : 347 - 358
  • [30] PREDICTION OF NUCLEATE POOL BOILING HEAT-TRANSFER COEFFICIENTS OF REFRIGERANT-OIL MIXTURES
    JENSEN, MK
    JACKMAN, DL
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1984, 106 (01): : 184 - 190