Influence of metal foam on heat transfer characteristics of refrigerant-oil mixture flow boiling inside circular tubes

被引：40
|
作者：
Zhu, Yu [1 ]
Hu, Haitao [1 ]
Ding, Guoliang [1 ]
Sun, Shuo [1 ]
Jing, Yaolong [1 ,2 ]
机构：
[1] Shanghai Jiao Tong Univ, Inst Refrigerat & Cryogen, Shanghai 200240, Peoples R China
[2] Carrier Corp, Prod Mkt, Shanghai 200001, Peoples R China
来源：
APPLIED THERMAL ENGINEERING | 2013年 / 50卷 / 01期
关键词：
Flow boiling; Flow pattern; Heat transfer; Metal foam; Oil; HORIZONTAL TUBES; THERMAL-ANALYSIS; 2-PHASE FLOW; PART II; EXCHANGERS;
D O I：
10.1016/j.applthermaleng.2012.06.045
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The influence of metal foam on heat transfer characteristics of refrigerant and oil mixture flow boiling inside circular tubes was experimentally investigated on two horizontal circular tubes filled with 5 PPI and 10 PPI copper foams, respectively. The experimental conditions include saturation pressure of 995 kPa, mass flux from 10 to 30 kg m(-2) s(-1), heat flux from 3.1 to 9.3 kW m(-2), inlet vapor quality from 0.175 to 0.775 and oil concentration from 0% to 5%. The experimental results reveal that metal foam enhances the flow boiling heat transfer coefficient of refrigerant by a maximum of 185%, while the enhancement effect of metal foam is weakened at oil presence conditions. A new correlation is developed, which can agree with 98% of the experimental data within a deviation of +/- 30%. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1246 / 1256
页数：11
相关论文
共 50 条
  • [1] Influence of tube diameter on heat transfer characteristics of refrigerant-oil mixture flow boiling in metal-foam filled tubes
    Hu, Haitao
    Zhu, Yu
    Peng, Hao
    Ding, Guoliang
    Sun, Shuo
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2014, 41 : 121 - 136
  • [2] Flow boiling pressure drop characteristics of refrigerant-oil mixture inside metal-foam filled tubes
    Hu, Haitao
    Zhu, Yu
    Peng, Hao
    Ding, Guoliang
    Sun, Shuo
    Huagong Xuebao/CIESC Journal, 2014, 65 : 95 - 100
  • [3] Effect of tube diameter on pressure drop characteristics of refrigerant-oil mixture flow boiling inside metal-foam filled tubes
    Ding, G. (glding@sjtu.edu.cn), 1600, Elsevier Ltd (61):
  • [4] Effect of tube diameter on pressure drop characteristics of refrigerant-oil mixture flow boiling inside metal-foam filled tubes
    Hu, Haitao
    Zhu, Yu
    Peng, Hao
    Ding, Guoliang
    Sun, Shuo
    APPLIED THERMAL ENGINEERING, 2014, 62 (02) : 433 - 443
  • [5] Influence of carbon nanotubes on nucleate pool boiling heat transfer characteristics of refrigerant-oil mixture
    Peng, Hao
    Ding, Guoliang
    Hu, Haitao
    Jiang, Weiting
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2010, 49 (12) : 2428 - 2438
  • [6] Two-phase flow heat transfer correlations for refrigerant-oil mixture flows inside augmented tubes
    Department of Mechanical Engineering, Wichita State University, Wichita, KS 67260, United States
    J Enhanced Heat Transfer, 6 (405-418):
  • [7] NUCLEATE POOL BOILING OF REFRIGERANT-OIL MIXTURE FROM TUBES
    DOUGHERT.RL
    SAUER, HJ
    ASHRAE JOURNAL-AMERICAN SOCIETY OF HEATING REFRIGERATING AND AIR-CONDITIONING ENGINEERS, 1974, 16 (05): : 29 - 29
  • [8] BOILING HEAT TRANSFER ON A FINE HORIZONTAL WIRE IN A REFRIGERANT-OIL MIXTURE.
    Monde, Masanori
    Hahne, Erich
    Heat Transfer - Japanese Research, 1987, 16 (06): : 48 - 60
  • [9] Effect of oil on two-phase pressure drop of refrigerant flow boiling inside circular tubes filled with metal foam
    Hu, Haitao
    Zhu, Yu
    Ding, Guoliang
    Sun, Shuo
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2013, 36 (02): : 516 - 526
  • [10] Entropy generation during flow boiling of pure refrigerant and refrigerant-oil mixture
    Revellin, R.
    Bonjour, J.
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2011, 34 (04): : 1040 - 1047
12345