Temperature effects on the wear behavior of particulate reinforced Al-based composites

被引：53

作者：

Martín, A ^{[1
]}

Rodríguez, J ^{[1
]}

Llorca, J ^{[1
]}

机构：

[1] Univ Politecn Madrid, Dept Mat Sci, ETS Ingn Caminos, E-28040 Madrid, Spain

来源：

WEAR | 1999年 / 225卷

关键词：

wear behavior; temperature; Al-based composites;

D O I：

10.1016/S0043-1648(98)00385-8

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Particulate reinforced Al-based composites exhibit lower wear rates in comparison to the unreinforced monolithic alloys. To study the influence of temperature on the tribological behavior of two aluminum alloys, 2014 and 6061, reinforced with aluminum oxide particles, wear tests were carried out in an oscillating friction machine with tempered steel spheres as counterbodies in the temperature range 293 to 473 K. Examination of the worn specimens by scanning electron microscopy clarified the prevailing physical mechanism of wear in these materials. The test results were also used to determine wear resistance and friction coefficient vs. temperature. Numerical modeling by finite elements has been carried out to investigate the actual stress state near the contact. (C) 1999 Elsevier Science S.A. All rights reserved.

引用

页码：615 / 620

页数：6

共 14 条

[1] METAL-MATRIX COMPOSITES IN THE AUTOMOTIVE INDUSTRY - OPPORTUNITIES AND CHALLENGES [J].

ALLISON, JE ;

COLE, GS .

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1993, 45 (01) :19-24

[2] EFFECT OF MICROSTRUCTURE (PARTICULATE SIZE AND VOLUME FRACTION) AND COUNTERFACE MATERIAL ON THE SLIDING WEAR-RESISTANCE OF PARTICULATE-REINFORCED ALUMINUM-MATRIX COMPOSITES [J].

ALPAS, AT ;

ZHANG, J .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (05) :969-983

[3]

Cowan R.S., 1992, ASM HDB, V18, P39

[4] Dry sliding wear of an alumina short fibre reinforced Al-Si alloy against steel [J].

Jiang, JQ ;

Tan, RS .

WEAR, 1996, 195 (1-2) :106-111

[5]

*KARLS SOR, 1989, ABAQUS MAN

[6] Wear of SiC-reinforced Al-matrix composites in the temperature range 20-200 degrees C [J].

Martin, A ;

Martinez, MA ;

LLorca, J .

WEAR, 1996, 193 (02) :169-179

[7] WEAR OF AL-SI ALLOYS AND AL-SI/SIC COMPOSITES AT AMBIENT AND ELEVATED-TEMPERATURES [J].

MARTINEZ, MA ;

MARTIN, A ;

LLORCA, J .

SCRIPTA METALLURGICA ET MATERIALIA, 1993, 28 (02) :207-212

[8]

MINGLER B, 1993, Z METALLKD, V84, P313

[9] Fracture toughness and fracture mechanisms of Al-Al2O3 composites at cryogenic and elevated temperatures [J].

Poza, P ;

Llorca, J .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 206 (02) :183-193

[10]

Rohatgi PK, 1992, ASM HDB, V18, P801

← 1 2 →