Effects of interface number on the temperature and frequency dependence of the properties of Pb(Zr0.52Ti0.48)O3/Ba(Mg1/3Ta2/3)O3 thin films

被引:1
作者
Wu, Zhi [1 ]
Chen, Wen [2 ]
Zhou, Jing [2 ]
Shen, Jie [2 ]
机构
[1] Hunan Inst Technol, Sch Mat & Chem Engn, Hengyang 421002, Peoples R China
[2] Wuhan Univ Technol, Sch Mat Sci & Engn, State Key Lab Adv Technol Mat Synth & Proc, Wuhan 430070, Hubei, Peoples R China
基金
中国国家自然科学基金;
关键词
Interfaces; Multilayers; Temperature dependence; Frequency dependence; Remanent polarization; Sol-gel deposition; Lead zirconate titanate; Barium magnesium tantalate; MICROWAVE DIELECTRIC-PROPERTIES; STACKING LAYERS;
D O I
10.1016/j.tsf.2017.11.013
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this paper, PbZr0.52Ti0.48O3 (PZT) and Ba(Mg1/3Ta2/3)O-3 (BMT) thin films were prepared by sol-gel method and aqueous solution-gel method, respectively. PZT/BMT thin films with different interface numbers were prepared and the effects of interface number on the temperature and frequency dependence of PZT/BMT thin films were investigated. The interface number can improve the temperature stability of PZT/BMT thin films in the 85 to 205 degrees C range. As the temperature increases, there is an increase in the remanent polarization for the PZT/BMT thin films and the increasing rate of the remanent polarization decreases with the increase of interface number. As the frequency increases, the remanent polarization for the PZT/BMT thin films decreases and the decline rate of remanent polarization slows with the interface number increasing, indicating that interface number can improve the frequency stability of PZT/BMT thin films.
引用
收藏
页码:23 / 27
页数:5
相关论文
共 50 条
  • [31] Electrode interface controlled electrical properties in epitaxial Pb(Zr0.52Ti0.48)O3 films grown on Si substrates with SrTiO3 buffer layer
    Boni, Andra Georgia
    Chirila, Cristina
    Pasuk, Iuliana
    Negrea, Raluca
    Trupina, Lucian
    Le Rhun, Gwenael
    Vilquin, Bertrand
    Pintilie, Ioana
    Pintilie, Lucian
    THIN SOLID FILMS, 2015, 593 : 124 - 130
  • [32] Preparation and characterization of unimorph actuators based on piezoelectric Pb(Zr0.52Ti0.48)O3 materials
    Yin, Yi
    Ye, Hui
    Zhan, Wenbo
    Hong, Liang
    Ma, Haimin
    Xu, Jian
    SENSORS AND ACTUATORS A-PHYSICAL, 2011, 171 (02) : 332 - 339
  • [33] Effect of substrate on crystallization of sol-gel-derived Pb(Zr0.52Ti0.48)O3 thin films by microwave annealing
    Wang, Zhanjie
    Chen, Yanna
    ADVANCED MATERIALS SCIENCE AND TECHNOLOGY, (IFAMST-8), 2013, 750 : 212 - 215
  • [34] Enhanced Magnetodielectric Effect in Graded CoFe2O4/Pb(Zr0.52Ti0.48)O3 Particulate Composite Films
    Chen, Bo
    Wang, Jun-Yong
    Zhou, Ming-Xiu
    Wan, Jian-Guo
    Liu, Jun-Ming
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2014, 97 (05) : 1450 - 1455
  • [35] A novel wet-chemical process to synthesise Ba(Mg1/3Ta2/3)O3 nanopowders
    Xu, LH
    Lian, F
    Yang, J
    Ferreira, JMF
    CERAMICS INTERNATIONAL, 2002, 28 (05) : 549 - 552
  • [36] Thickness dependence of the electrical and electromechanical properties of Pb(Zr,Ti)O3 thin films
    Maiwa, H
    Ichinose, N
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 2003, 42 (7A): : 4392 - 4398
  • [37] Enhanced ferroelectric polarization in epitaxial (Pb1-xLax)(Zr0.52Ti0.48)O3 thin films due to low La doping
    Mukherjee, Devajyoti
    Hordagoda, Mahesh
    Pesquera, David
    Ghosh, Dipankar
    Jones, Jacob L.
    Mukherejee, Pritish
    Witanachchi, Sarath
    PHYSICAL REVIEW B, 2017, 95 (17)
  • [38] Effect of shock front geometry on shock depolarization of Pb(Zr0.52Ti0.48)O3 ferroelectric ceramics
    Shkuratov, Sergey I.
    Baird, Jason
    Talantsev, Evgueni F.
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2012, 83 (07)
  • [39] Impact-based energy harvesting characteristics of cement/Pb(Zr0.52Ti0.48)O3 composites
    Kumar, Amit
    Prasad, K.
    FERROELECTRICS, 2023, 613 (01) : 148 - 159
  • [40] Synthesis and electrical properties of Pb(Zr0.52Ti0.48)O3 thick films embedded with ZnO nanoneedles prepared by the hybrid sol–gel method
    Ran Lu
    Jie Yuan
    Bin Li
    Yong Li
    Quan-Liang Zhao
    Mao-Sheng Cao
    Journal of Materials Science: Materials in Electronics, 2013, 24 : 2521 - 2526