Machine and tool development for forming of polymeric tubular micro-components

被引：5

作者：

Zhao, Jie ^{[1
]}

Yip, Arthur Lan Kuan ^{[1
]}

Qin, Yi ^{[1
]}

Razali, Akhtar ^{[1
]}

Fei, Zhi-cong ^{[1
]}

机构：

[1] Univ Strathclyde, Dept Design Mfg & Engn Management, Glasgow G1 1XJ, Lanark, Scotland

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2012年 / 22卷

关键词：

hot-embossing; micro-forming; desktop micro-manufacturing system; polymeric tubular micro-components;

D O I：

10.1016/S1003-6326(12)61711-7

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

This paper reports the work associated with the development of a desktop hot-embossing machine system and tools which would enable volume production of polymeric tubular micro-components for various applications. The development was undertaken by considering factors such as machine dynamic performance, precision guides to tools, tool heating and cooling, raw material feeding and end-part collection, control strategy. It was assisted with FE analysis and a series of forming experiment. An integrated machine system has now been constructed and tested with the forming of several demonstration-components. A good result was obtained from these tests.

引用

页码：S214 / S221

页数：8

共 14 条

[1] Hot embossing as a method for the fabrication of polymer high aspect ratio structures
Becker, H
Heim, U
[J]. SENSORS AND ACTUATORS A-PHYSICAL, 2000, 83 (1-3) : 130 - 135
[2] EU Polytubes Consortium, 2011, TECHN REP EUR COMM
[3] Hartl C, 2010, MICRO NANO TECHNOL, P146, DOI 10.1016/B978-0-8155-1545-6.00009-0
[4] Hot embossing - The molding technique for plastic microstructures
Heckele, M
Bacher, W
Muller, KD
[J]. MICROSYSTEM TECHNOLOGIES, 1998, 4 (03) : 122 - 124
[5] Review on micro molding of thermoplastic polymers
Heckele, M
Schomburg, WK
[J]. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2004, 14 (03) : R1 - R14
[6] Qin Y, 2010, MICRO NANO TECHNOL, P1
[7] Micro-forming and miniature manufacturing systems - development needs and perspectives
Qin, Yi
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 177 (1-3) : 8 - 18
[8] Micro-manufacturing: research, technology outcomes and development issues
Qin, Yi
Brockett, A.
Ma, Y.
Razali, A.
Zhao, J.
Harrison, C.
Pan, W.
Dai, X.
Loziak, D.
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 47 (9-12) : 821 - 837
[9] Qin YM, 2008, OPER THEORY ADV APPL, V184, P1
[10] Development of a New High-Precision Feeder for Micro-Sheet-Forming
Razali, Akhtar
Qin, Yi
Zhao, Jie
Harrison, Colin
Smith, R.
[J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2011, 133 (06):

← 1 2 →