Rheological properties of amorphous poly alpha olefin (APAO) modified asphalt binders

被引：42

作者：

Wei, Jianming ^{[1
]}

Liu, Zhangyong ^{[2
]}

Zhang, Yuzhen ^{[1
]}

机构：

[1] China Univ Petr East China, State Key Lab Heavy Oil Proc, Qingdao 266580, Peoples R China

[2] Shandong Zhonghai Chem Grp, Dongying 257061, Peoples R China

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2013年 / 48卷

基金：

中国国家自然科学基金;

关键词：

APAO; Asphalt binder; Rheological properties; Temperature susceptibility; VISCOSITY; SBS;

D O I：

10.1016/j.conbuildmat.2013.07.087

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The rheological properties of amorphous poly alpha olefin (APAO) modified asphalt binders were investigated through rotational viscometer (RV), dynamic shear rheometer (DSR), and bending beam rheometer (BBR) tests in the laboratory. Two types of APAOs and four percentages of APAO were selected in the study. RV results indicate that the addition of APAO increases the viscosity of modified asphalt binder at high temperatures. DSR measurements show that the elastic property of asphalt binder is enhanced and the failure temperature is improved due to the addition of APAO. In addition, BBR results demonstrate that additional APAO has negative effects on the creep stiffness and creep rate of the modified asphalt binders. The temperature susceptibility of asphalt binder is reduced at high, intermediate, and low temperature zones after adding APAO. Moreover, this study found that APAO K3050 has better modification than K3020 due to its higher viscosity. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：533 / 539

页数：7

共 31 条

[1] The investigation and comparison effects of SBS and SBS with new reactive terpolymer on the rheological properties of bitumen [J].

Ahmedzade, Perviz .

CONSTRUCTION AND BUILDING MATERIALS, 2013, 38 :285-291

[2]

[Anonymous], 2009, D2493 ASTM

[3]

[Anonymous], 2012, ASTM D4402

[4]

[Anonymous], 2004, F40 JTG MIN TRANSP P

[5]

[Anonymous], 2009, INT J PAVEMENT RES T

[6]

[Anonymous], 2008, STANDARD TEST METHOD

[7]

ASTM, 2008, Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR)

[8] Preparation of an SBS Latex-Modified Bitumen Emulsion and Performance Assessment [J].

Cai, H. M. ;

Wang, T. ;

Zhang, J. Y. ;

Zhang, Y. Z. .

PETROLEUM SCIENCE AND TECHNOLOGY, 2010, 28 (10) :987-996

[9] Investigation of asphalt binder containing various crumb rubbers and asphalts [J].

Cong, Peiliang ;

Xun, Peijun ;

Xing, Mingliang ;

Chen, Shuanfa .

CONSTRUCTION AND BUILDING MATERIALS, 2013, 40 :632-641

[10] Viscosity, plasticity, and diffusion as examples of absolute reaction rates [J].

Eyring, H .

JOURNAL OF CHEMICAL PHYSICS, 1936, 4 (04) :283-291

← 1 2 3 4 →