Corrosion evaluation of alloys and MCrAlX coatings in molten carbonates for thermal solar applications

被引:53
|
作者
Gomez-Vidal, Judith C. [1 ]
Noel, John [1 ]
Weber, Jacob [1 ]
机构
[1] Natl Renewable Energy Lab, 15013 Denver West Pkwy, Golden, CO 80401 USA
关键词
Molten salts; Corrosion; Carbonates; Coating; Alumina; Oxidation; HOT CORROSION; INTERMETALLIC ALLOY; HEAT-STORAGE; OXIDATION; BEHAVIOR; SALT; ALUMINA; STEELS; WATER;
D O I
10.1016/j.solmat.2016.07.029
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Stainless steels (SS) 310, 321, 347, Incoloy 800H (In800H), alumina-forming austenitic (AFA-OC6), Ni superalloy Inconel 625 (IN625), and MCrAIX (M: Ni, and/or Co; X: Y, Hf, Si, and/or Ta) coatings were corroded in molten carbonates in N-2 and bone-dry CO2 atmospheres. Electrochemical tests in molten eutectics K2CO3-Na2CO3 and Na2CO3-K2CO3-Li2CO3 at temperatures higher than 600 degrees C were evaluated using an open-circuit potential followed by a potentiodynamic polarization sweep to determine the corrosion rates. Because the best-performing alloys at 750 degrees C were In800H followed by SS310, these two alloys were selected as the substrate material for the MCrAIX coatings. The coatings were able to mitigate corrosion in molten carbonates environments. The corrosion of substrates SS310 and In800H was reduced from similar to 2500 mu m/year to 34 mu m/year when coated with high-velocity oxyfuel (HVOF) NiCo-CrAlHfSiY and pre-oxidized (air, 900 degrees C, 24 h, 0.5 degrees C/min) before molten carbonate exposure at 700 degrees C in bone-dry CO2 atmosphere. Metallographic characterization of the corroded surfaces showed that the formation of a uniform alumina scale during the pre-oxidation seems to protect the alloy from the molten carbonate attack. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:517 / 525
页数:9
相关论文
共 50 条
  • [1] Corrosion resistance of MCrAlX coatings in a molten chloride for thermal storage in concentrating solar power applications
    Judith C. Gomez-Vidal
    npj Materials Degradation, 1
  • [2] Corrosion resistance of MCrAlX coatings in a molten chloride for thermal storage in concentrating solar power applications
    Gomez-Vidal, Judith C.
    NPJ MATERIALS DEGRADATION, 2017, 1 (01)
  • [3] MOLTEN-SALT CORROSION OF SELECTED FE-ALLOYS FOR SOLAR THERMAL ELECTRIC APPLICATIONS
    KRAMER, CM
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1978, 125 (03) : C112 - C112
  • [4] Corrosion and protection of metallic materials in molten carbonates for concentrating solar power and molten carbonate electrolysis applications
    Wang, Peilin
    Du, Kaifa
    Yin, Huayi
    Wang, Dihua
    CORROSION COMMUNICATIONS, 2023, 11 : 58 - 71
  • [5] Corrosion and protection of metallic materials in molten carbonates for concentrating solar power and molten carbonate electrolysis applications
    Peilin Wang
    Kaifa Du
    Huayi Yin
    Dihua Wang
    Corrosion Communications, 2023, 11 (03) : 58 - 71
  • [6] Corrosion behavior of Fe-Ni alloys in molten carbonates
    Koura, N
    Takeuchi, K
    DENKI KAGAKU, 1996, 64 (01): : 27 - 31
  • [7] HOT CORROSION OF NI-CR ALLOYS IN MOLTEN CARBONATES
    SHORES, DA
    LEE, KN
    JOURNAL OF METALS, 1988, 40 (11): : 19 - 20
  • [8] Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies
    Gomez-Vidal, Judith C.
    Tirawat, Robert
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2016, 157 : 234 - 244
  • [9] Corrosion in Molten Salts for Solar Thermal Power
    Summers, Kodi
    Chidambaram, Dev
    ELECTROCHEMICAL SOCIETY INTERFACE, 2021, 30 (02): : 63 - 66
  • [10] Evaluation of Multilayer Thin Film Coatings for Solar Thermal Applications
    M. Muralidhar Singh
    Harinandan Kumar
    K. V. Nagesha
    P. Sivaiah
    G. Hemath Kumar
    K. M. Ajay
    G. Vijaya
    Arabian Journal for Science and Engineering, 2019, 44 : 7789 - 7797