Microstructure characterization of in situ synthesized porous Si2N2O ceramics using spodumene additive

被引：18
|
作者：
Dong, Xue [1 ]
Liu, Jiachen [1 ]
Du, Haiyan [1 ]
Guo, Anran [1 ]
Liu, Mengxia [1 ]
机构：
[1] Tianjin Univ, Key Lab Adv Ceram & Machining Technol, Minist Educ, Sch Mat Sci & Engn, Tianjin 300072, Peoples R China
来源：
CERAMICS INTERNATIONAL | 2013年 / 39卷 / 04期
基金：
中国国家自然科学基金;
关键词：
A; Sintering; Ceramics; Fibers; TBA-based gel-casting; RELATIVELY HIGH-STRENGTH; SILICA CERAMICS;
D O I：
10.1016/j.ceramint.2012.10.224
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Porous Si2N2O ceramics was synthesized by the tert-butyl alcohol-based gel-casting method at a relatively low temperature using Si3N4 and SiO2 powders as the starting materials and spodumene (LiAl(SiO3)(2)) as the sintering additive. Porous Si2N2O ceramics with relative high compressive strength (10.80 MPa) and high porosity (65.5%) were successfully fabricated. The microstructure of porous Si2N2O after sintering at different sintering regimes was studied. The fibers observed in the pores can increase the compressive strength and the specific surface area of the sample. (C) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码：4657 / 4662
页数：6
相关论文
共 50 条
  • [1] Microstructure characterization of in situ synthesized porous Si3N4–Si2N2O composites using feldspar additive
    Rajat Kanti Paul
    Chi-Woo Lee
    Hai-Doo Kim
    Byong-Taek Lee
    Journal of Materials Science, 2007, 42 : 4701 - 4706
  • [2] Microstructure characterization of in situ synthesized porous Si3N4-Si2N2O composites using feldspar additive
    Paul, Rajat Kanti
    Lee, Chi-Woo
    Kim, Hai-Doo
    Lee, Byong-Taek
    JOURNAL OF MATERIALS SCIENCE, 2007, 42 (12) : 4701 - 4706
  • [3] Microstructure control of porous in-situ synthesized Si2N2O-Si3N4 ceramics
    Paul, Rajat Kanti
    Lee, Chi-Woo
    Kim, Hai-Doo
    Lee, Byong-Taek
    PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 : 1049 - +
  • [4] Effect of in situ synthesis of Si2N2O on microstructure and the mechanical properties of fused quartz ceramics
    Wang, Yingxia
    Hou, Qinglin
    Tian, Liang
    Chen, Pingfei
    Xiao, Jiakai
    CERAMICS INTERNATIONAL, 2020, 46 (07) : 8725 - 8729
  • [5] Effect of Si2N2O content on the microstructure, properties, and erosion of silicon nitride–Si2N2O in situ composites
    Dong-Soo Park
    Hyun-Ju Choi
    Byung-Dong Han
    Hai-Doo Kim
    Dae-Soon Lim
    Journal of Materials Research, 2002, 17 : 2275 - 2280
  • [6] Preparation of Porous Si2N2O/SiC Ceramics by Microwave Sintering
    Duan, Yuxuan
    Guan, Li
    Min, Zhiyu
    Fu, Ruijie
    Li, Jiaxin
    Fan, Lei
    Abadikhah, Hamidreza
    Zhao, Biao
    Dong, Binbin
    Zhang, Rui
    ADVANCED ENGINEERING MATERIALS, 2024, 26 (22)
  • [7] In situ synthesis of Si2N2O/Si3N4 composite ceramics using polysilyloxycarbodiimide precursors
    Cheng, Huijie
    Li, Yali
    Kroke, Edwin
    Herkenhoff, Stefanei
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2013, 33 (11) : 2181 - 2189
  • [8] In-Situ Reactive Synthesis of Si2N2O Ceramics and Its Properties
    Wu, Shoujun
    Li, Xiangming
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (12): : 4859 - 4865
  • [9] In-Situ Reactive Synthesis of Si2N2O Ceramics and Its Properties
    Shoujun Wu
    Xiangming Li
    Metallurgical and Materials Transactions A, 2012, 43 : 4859 - 4865
  • [10] Preparation and mechanical properties of Si2N2O ceramics
    王思青
    阎玉华
    Transactions of Nonferrous Metals Society of China, 2000, (04) : 516 - 519
12345