Hydrogen permeation studied by electrochemical techniques

被引:41
作者
Azevedo, C
Bezerra, PSA
Esteves, F
Joia, CJBM
Mattos, OR
机构
[1] Fed Univ Rio De Janeiro, COPPE, PEMM, EE, Rio De Janeiro, Brazil
[2] Fundacao Brasileira Tecnol Soldagem, BR-20550011 Rio De Janeiro, Brazil
[3] Petrobras SA, R&D, CENPES, DIPLOT,SEMEC, BR-21949900 Rio De Janeiro, Brazil
关键词
hydrogen permeation; H2S corrosion; impedance; corrosion monitoring;
D O I
10.1016/S0013-4686(99)00158-9
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
In this paper impedance measurements, weight loss and hydrogen permeation tests were used to characterise the H2S corrosion process. In a classical permeation cell, where a steel membrane is separating two electrolytic solutions, it was seen that the detection of hydrogen diffusing through the steel is totally controlled by the anodic reactions occurring at the steel/H2S interface. Solutions with different aggressiveness were used to define the maximum acceptable permeation current to avoid cracks nucleation and propagation. From these tests a procedure was developed to monitor hydrogen induced cracking (HIC) in industrial plants. (C) 1999 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:4431 / 4442
页数:12
相关论文
共 14 条
[11]   THE EFFECT OF H2S CONCENTRATION AND PH ON HYDROGEN PERMEATION IN AISI-410 STAINLESS-STEEL IN 5-PERCENT NACL [J].
TURNBULL, A ;
MARIA, MSD ;
THOMAS, ND .
CORROSION SCIENCE, 1989, 29 (01) :89-104
[12]  
VIDEM K, 1994, NACE CORROSION 94
[13]  
WILHELM SM, 1992, NACE CORROSION 92, P449
[14]  
Yoshizawa S., 1975, ZAIR TO KANKYO, V24, P511, DOI [10.3323/jcorr1974.24.10_511, DOI 10.3323/JCORR1974.24.10_511]