Strain Rate Behavior in Tension of Reinforcing Steels HPB235, HRB335, HRB400, and HRB500

The strain rate effect of reinforcing steel bars is generally indispensable for modeling the dynamic responses of reinforced concrete structures in blast and impact events. A systematic experimental investigation was conducted on the strain rate behavior of reinforcing steel bar grades HPB235, HRB335, HRB400, and HRB500 which are widely used in the field of civil engineering in China. The dynamic testing was performed using a servo-hydraulic Instron VHS160/100-20 in a strain rate range from 2 to 75 s(-1). Stress-strain curves at preset strain rates were obtained. The test data were then used to derive the parameters in a model based on the dynamic increase factors (DIFs) of strengths and the Johnson-Cook constitutive model. Results indicated that a significant strain rate effect was observed for the four rebar grades. The dynamic yield strengths increased from 13% to 41% and their ultimate strengths improved from 9% to 19% in the strain rate range during testing. The strain rate behavior of the four rebar grades could be appropriately predicted using the parameters in the model based on the DIFs of strengths and the Johnson-Cook model.