A coupled FFM model to interpret fracture toughness values for brittle materials

被引：0

作者：

Firrao, Donato ^{[1
]}

Matteis, Paolo ^{[1
]}

Sapora, Alberto ^{[2
]}

Cornetti, Pietro ^{[2
]}

Carpinteri, Alberto ^{[2
]}

机构：

[1] Politecn Torino, Dept Appl Sci & Technol, Corso Duca Abruzzi 24, I-10129 Turin, Italy

[2] Politecn Torino, Dept Struct Geotech & Bldg Engn, Corso Duca Abruzzi 24, I-10129 Turin, Italy

来源：

21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) | 2016年 / 2卷

关键词：

HTA steel; CTA steel; notch radius; austenitic grain size; Finite Fracture Mechanics; NOTCH; STRESS;

D O I：

10.1016/j.prostr.2016.06.249

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Around 1970 quenching AISI 4340 steel from 1200 degrees C was discovered to lead to much higher fracture toughness, in the as quenched state, than by conventional austenitizing at 870 degrees C. Further researches have ascertained that the apparent toughness increase is limited to fracture toughness tests, whereas Charpy-V impact tests do not show any betterment due to high temperature austenitizing, in respect to conventional heat-treating. Various explanations of these contradicting results were given on the basis of the then existing theories. The puzzling phenomenon is here interpreted by means of Finite Fracture Mechanics theories, based on the contemporaneous fulfilment of a stress requirement and the energy balance. Copyright (C) 2016 The Authors. Published by Elsevier B.V.

引用

页码：1983 / 1990

页数：8

共 50 条

[21] Experimental study of the relationship between fracture initiation toughness and brittle crack arrest toughness predicted from small-scale testing [J].

Taylor, Jessica ;

Mehmanparast, Ali ;

Kulka, Rob ;

Moore, Philippa ;

Xu, Li ;

Farrahi, Gholam Hossein .

THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 110

[22] Damage mechanics model for correlating notch toughness in Charpy impact tests with fracture toughness in cracked static fracture tests [J].

Wong, Wei Jun ;

Walters, Carey L. .

ENGINEERING FRACTURE MECHANICS, 2025, 320

[23] A generalized strain energy density criterion for mixed mode fracture analysis in brittle and quasi-brittle materials [J].

Ayatollahi, M. R. ;

Moghaddam, M. Rashidi ;

Berto, F. .

THEORETICAL AND APPLIED FRACTURE MECHANICS, 2015, 79 :70-76

[24] Experimental Study on the Fracture Toughness of Granite Affected by Coupled Mechanical-Thermo [J].

Feng, Gan ;

Liu, Chen-Bo ;

Wang, Ji-Lan ;

Tao, Ye ;

Duan, Zhi-Pan ;

Xiang, Wei-Ning .

LITHOSPHERE, 2022, 2022 (SpecialIssue10)

[25] Configurational-force interface model for brittle fracture propagation [J].

Khisamitov, Ildar ;

Meschke, Guenther .

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2019, 351 (351-378) :351-378

[26] Fracture Property of Y-Shaped Cracks of Brittle Materials under Compression [J].

Zhang, Xiaoyan ;

Zhu, Zheming ;

Liu, Hongjie .

SCIENTIFIC WORLD JOURNAL, 2014,

[27] Spreadsheet-based method for predicting temperature dependence of fracture toughness in ductile-to-brittle temperature region [J].

Meshii, Toshiyuki .

ADVANCES IN MECHANICAL ENGINEERING, 2019, 11 (08)

[28] Critical Distance Default Values for Structural Steels and a Simple Formulation to Estimate the Apparent Fracture Toughness in U-Notched Conditions [J].

Cicero, Sergio ;

Fuentes, Juan Diego ;

Procopio, Isabela ;

Madrazo, Virginia ;

Gonzalez, Pablo .

METALS, 2018, 8 (11)

[29] Can the finite fracture mechanics coupled criterion be applied to V-notch tips of a quasi-brittle steel alloy? [J].

Yosibash, Zohar ;

Mendelovich, Vered ;

Gilad, Ilan ;

Bussiba, Arie .

ENGINEERING FRACTURE MECHANICS, 2022, 269

[30] A Probabilistic Damage Model of the Dynamic Fragmentation Process in Brittle Materials [J].

Forquin, Pascal ;

Hild, Francois .

ADVANCES IN APPLIED MECHANICS, VOL 44, 2010, 44 :1-72

← 1 2 3 4 5 →