Development of high solid content aqueous 3Y-TZP suspensions for direct inkjet printing using a thermal inkjet printer

被引：47

作者：

Oezkol, E. ^{[1
]}

Ebert, J. ^{[1
]}

Uibel, K. ^{[1
]}

Waetjen, A. M. ^{[1
]}

Telle, R. ^{[1
]}

机构：

[1] Rhein Westfal TH Aachen, Dept Ceram & Refractory Mat, D-52064 Aachen, Germany

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2009年 / 29卷 / 03期

关键词：

Shaping; Suspensions; Direct inkjet printing; ZrO(2); JET PRINTER; CERAMICS;

D O I：

10.1016/j.jeurceramsoc.2008.06.020

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

An aqueous 3Y-TZP suspension with 24.2 vol.% solid content was developed for "Direct Inkjet Printing" (DIP). The printing unit was a common HP-DeskJet printer. The suspension was adjusted in terms of particle size, viscosity, and pH-value, so that it became compatible with the printing system. Therefore, suspensions of various compositions were prepared and printed two-dimensionally to analyze the influence of several organic additives on printability. The printouts were evaluated and typical printing errors were classified. The composition of the suspension was optimized and successive and error free single layers of 3Y-TZP were printed. The suspension was examined and characterized in terms of particle size and distribution, composition, viscosity, surface tension, pH-value, vapour pressure, and the Ohnesorge number. A printed 3Y-TZP layer of 12 mu m thickness was sintered to full density. (c) 2008 Elsevier Ltd. All rights reserved.

引用

页码：403 / 409

页数：7

共 19 条

[1] PZT pillars for 1-3 composites prepared by ink-jet printing [J].

Bhatti, AR ;

Mott, M ;

Evans, JRG ;

Edirisinghe, MJ .

JOURNAL OF MATERIALS SCIENCE LETTERS, 2001, 20 (13) :1245-1248

[2] Solid free-forming of ceramics using a continuous jet printer [J].

Blazdell, P .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 137 (1-3) :49-54

[3] Chemical solid free-form fabrication: Making shapes without molds [J].

Calvert, P ;

Crockett, R .

CHEMISTRY OF MATERIALS, 1997, 9 (03) :650-663

[4] Stereolithography of structural complex ceramic parts [J].

Chartier, T ;

Chaput, C ;

Doreau, F ;

Loiseau, M .

JOURNAL OF MATERIALS SCIENCE, 2002, 37 (15) :3141-3147

[5]

DAVIS DR, 1997, Patent No. 5695820

[6]

FRIED JR, 2003, POLYM SCI TECHNOL, P96

[7]

GUNSTER J, 2006, CFI-CERAM FORUM INT, V13, P53

[8] Direct ink writing of three-dimensional ceramic structures [J].

Lewis, Jennifer A. ;

Smay, James E. ;

Stuecker, John ;

Cesarano, Joseph, III .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2006, 89 (12) :3599-3609

[9] Microengineering of ceramics by direct ink-Jet printing [J].

Mott, M ;

Song, JH ;

Evans, JRG .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1999, 82 (07) :1653-1658

[10]

Mott M, 2001, J AM CERAM SOC, V84, P307, DOI 10.1111/j.1151-2916.2001.tb00655.x

← 1 2 →