Infilled frames: developments in the evaluation of cyclic behaviour under lateral loads

被引:68
作者
Cavaleri, L [1 ]
Fossetti, M [1 ]
Papia, M [1 ]
机构
[1] Univ Palermo, Dipartimento Ingn Strutturale & Geotecn, I-90128 Palermo, Italy
关键词
unfilled frames; masonry infill; stiffening effect; hysteretic behaviour; simplified model; equivalent strut;
D O I
10.12989/sem.2005.21.4.469
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In order to consider the modified seismic response of framed structures in the presence of masonry infills, proper models have to be formulated. Because of the complexity of the problem, a careful definition of an equivalent diagonal pin jointed strut, able to represent the horizontal force-interstorey displacement cyclic. law of the actual infill, may be a solution. In this connection the present paper, continuing a previous work in which a generalised criterion for the determination of the ideal cross-section of the equivalent strut was formulated, analizes some models known in literature for the prediction of the lateral cyclic behaviour discussing their field of validity. As a support of the discussion, the results of an experimental investigation involving single story-single bay infilled reinforced concrete. Frames under vertical and lateral loads with different kind of infill (actually not yet so much investigated) are presented. Finally, an improvement of a model known in the literature is proposed, taking the results of the experimental tests before mentioned into account.
引用
收藏
页码:469 / 494
页数:26
相关论文
共 25 条
[1]  
[Anonymous], 1974, 1374 CP BUILD RES ST
[2]  
[Anonymous], 1994, NCEER940004
[3]  
BERTERO VV, 1983, ASCE, V109, P1337
[4]   A new dynamic identification technique: application to the evaluation of the equivalent strut for infilled frames [J].
Cavaleri, L ;
Papia, M .
ENGINEERING STRUCTURES, 2003, 25 (07) :889-901
[5]  
Cavaleri L, 2004, P 13 WORLD C EARTHQ
[6]  
Doudoumis I.N., 1986, P 8 EUR C EARTHQ ENG, VVolume 3, P63
[7]  
Hendry AW, 1998, STRUCTURAL MASONRY
[8]  
Holmes H., 1961, P I CIVIL ENG, P473
[9]  
Jones RM., 1999, MECH COMPOS MATER, P11
[10]  
KLINGNER RE, 1978, J STRUCT DIV-ASCE, V104, P973