Phase Equilibria of the Co-Cu-Mo System at 900 and 1100°C

被引:2
作者
Liu, Shiju [1 ,2 ]
Yin, Fucheng [1 ,2 ]
Hu, Jingxian [1 ,2 ]
OuYang, Xuemei [1 ,2 ]
机构
[1] Xiangtan Univ, Sch Mat Sci & Engn, Xiangtan 411105, Hunan, Peoples R China
[2] Xiangtan Univ, Key Lab Mat Design & Preparat Technol Hunan Prov, Xiangtan 411105, Hunan, Peoples R China
基金
中国国家自然科学基金;
关键词
Co-Cu-Mo; Mo-Cu alloy; phase equilibria; x-ray diffraction; W-CU; COPPER; MOLYBDENUM; MICROSTRUCTURE; COMPOSITES; POWDERS; DIAGRAM; COBALT; IRON;
D O I
10.1007/s11669-019-00723-1
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The phase equilibria of the Co-Cu-Mo ternary system at 900 and 1100 degrees C have been studied by using x-ray diffraction (XRD) and scanning electron microscopy (SEM) coupled with energy-dispersive spectroscopy (EDS). Three and five three-phase regions have been confirmed in the system at 900 and 1100 degrees C, respectively. No ternary compound has been found in these two isothermal sections. At 900 degrees C, the maximum solubilities of Co and Cu in the phase are 56.5 and 4.4at.%, respectively. As the temperature rises to 1100 degrees C, their solubilities decrease slightly. Moreover, with the temperature increases from 900 to 1100 degrees C, in the Co phase, the solubility of Mo increases from 6.5 to 11.9at.% and the solubility of Cu increases from 8.3 to 12.1at.%.
引用
收藏
页码:275 / 284
页数:10
相关论文
共 27 条
[1]   Cu-Mo composite powders obtained by combustion-coreduction process [J].
Aydinyan, S. V. ;
Kirakosyan, H. V. ;
Kharatyan, S. L. .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2016, 54 :455-463
[2]  
Baskin ML, 1961, IZV AKAD NAUK SSSR O, V4, P111
[3]  
Brewer L, 1980, ATOM ENERGY REV, V119, P236
[4]  
Chen GQ, 2005, T NONFERR METAL SOC, V15, P110
[5]   Fabrication and characterization of W-15Cu composite powders by a novel mechano-chemical process [J].
Cheng, Jigui ;
Song, Peng ;
gong, Yanfei ;
Cai, Yanbo ;
Xia, Yonghong .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 488 (1-2) :453-457
[6]   The influence of the dispersion technique on the characteristics of the W-Cu powders and on the sintering behavior [J].
da Costa, FA ;
da Silva, AGP ;
Gomes, UU .
POWDER TECHNOLOGY, 2003, 134 (1-2) :123-132
[7]   Revised thermodynamic description for the Co-Mo system [J].
Davydov, AV ;
Kattner, UR .
JOURNAL OF PHASE EQUILIBRIA, 2003, 24 (03) :209-211
[8]   METASTABLE SOLID-SOLUTIONS IN VAPOR-DEPOSITED CU-CR, CU-MO, AND CU-W THIN-FILMS [J].
DIRKS, AG ;
VANDENBROEK, JJ .
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1985, 3 (06) :2618-2622
[9]  
Dreibholz, 1924, Z PHYS CHEM-STOCH VE, V108, P1
[10]  
EGOROV AV, 1987, SOV POWDER METALL+, V26, P137