Influence of Centrifugal Force on Characteristics of Turbine Shaft for Micro-spindle for Micro-cutting

被引：1
|
作者：
Li, Wei [1 ]
Zhou, Zhixiong [1 ]
Huang, Xiangming [1 ]
Chen, Chen [1 ]
Meng, Lingyun [1 ]
机构：
[1] Hunan Univ, Coll Mech & Vehicle Eng, Changsha 410082, Hunan, Peoples R China
来源：
ADVANCES IN ABRASIVE TECHNOLOGY XV | 2012年 / 565卷
关键词：
micro spindle; turbine shaft; centrifugal force; stress; frequency;
D O I：
10.4028/www.scientific.net/AMR.565.582
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The centrifugal force has great influence on characteristics of the turbine shaft. The changes of stress, diameter and natural frequency of the turbine shaft for self-developed micro-spindle for micro-cutting following with the rotational speed were studied by finite element (FE) simulation, which showed that stress, diameter of the turbine shaft and frequency of torsional vibration in elastic shaft coupling integrated with the turbine shaft caused by the centrifugal force increases almost linearly with increase of rotational speed and the higher the speed, the larger the increase. The frequencies of other vibrational modes were influenced by centrifugal force. Materials with good properties can improve characteristics of turbine shaft caused by the centrifugal force well.
引用
收藏
页码：582 / 587
页数：6
相关论文
共 50 条
  • [21] The Rx for Medical Manufacturing: Micro-Cutting
    Shaw, Jack
    MANUFACTURING ENGINEERING, 2024, 172 (02): : 20 - 21
  • [22] An approach on micro-cutting (deburring) process
    Dumitras, Catalin G.
    World Congress on Engineering 2007, Vols 1 and 2, 2007, : 1076 - 1081
  • [23] ORTHOGONAL CUTTING STUDY OF THE MICRO-CUTTING THIN WORKPIECE
    Saptaji, Kushendarsyah
    Subbiah, Sathyan
    PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2011, VOL 2, 2011, : 393 - 402
  • [24] Micro-cutting force model of micro-jet induced by cavitation collapse in the ultrasonic field at micro-nano scale
    Linzheng Ye
    Xijing Zhu
    Yan He
    The International Journal of Advanced Manufacturing Technology, 2022, 119 : 3695 - 3702
  • [25] A high-speed precision micro-spindle use for mechanical micro-machining
    Li, Wei
    Liu, Mingjia
    Ren, YingHui
    Chen, Qidi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 102 (9-12): : 3197 - 3211
  • [26] INFLUENCE OF FRICTION AND PROCESS PARAMETERS ON THE SPECIFIC CUTTING FORCE AND SURFACE CHARACTERISTICS IN MICRO CUTTING
    Weber, M.
    Autenrieth, H.
    Kotschenreuther, J.
    Gumbsch, P.
    Schulze, V.
    Loehe, D.
    Fleischer, J.
    MACHINING SCIENCE AND TECHNOLOGY, 2008, 12 (04) : 474 - 497
  • [27] Theory and experiments of cutting forces in micro-cutting process
    Li, Xiao-Zhou
    Yu, Hua-Dong
    Xu, Jin-Kai
    Li, Yi-Quan
    Zhao, Ping
    Guangxue Jingmi Gongcheng/Optics and Precision Engineering, 2009, 17 (05): : 1086 - 1092
  • [28] Micro-cutting force model of micro-jet induced by cavitation collapse in the ultrasonic field at micro-nano scale
    Ye, Linzheng
    Zhu, Xijing
    He, Yan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 119 (5-6): : 3695 - 3702
  • [29] Investigation of the surface characteristics for the micro-cutting process with finite element simulation
    Autenrieth, H.
    Weber, M.
    Deuchert, M.
    Schulze, V.
    THERMEC 2009, PTS 1-4, 2010, 638-642 : 2531 - +
  • [30] Micro-cutting with diamond tool micro-patterned by femtosecond laser
    Jaegu Kim
    Tae-Jin Je
    Sung-Hak Cho
    Eun-Chae Jeon
    Kyung-Hyun Whang
    International Journal of Precision Engineering and Manufacturing, 2014, 15 : 1081 - 1085
12345