AN ELASTOTHERMOVISCOPLASTICITY ANISOTROPIC DAMAGE MODEL FOR SHORT FIBER REINFORCED POLYMER COMPOSITES

被引:0
作者
He, Ge [1 ]
Liu, Yucheng [1 ]
Bammann, D. J. [1 ]
Horstemeyer, M. F. [1 ]
机构
[1] Mississippi State Univ, Mississippi State, MS 39762 USA
来源
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2018, VOL 12 | 2019年
关键词
STATE-VARIABLE MODEL; MECHANICAL-BEHAVIOR; GLASSY-POLYMERS; DEFORMATION; ORIENTATION; REPRESENTATION; FORMULATION; NUCLEATION; TENSORS;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
By using the internal state variable (ISV) theory (Horstemeyer and Bammann, 2010), we developed a finite deformation anisotropic and temperature dependent constitutive model to predict elastoviscoplasticity and progressive damage behavior of short fiber reinforced polymer (SFRP) composites. In this model, the SFRP is considered as a simple anisotropic equivalent medium (lamina), and the rate dependent plastic behavior of the SFRP is captured with the help of three physically-based ISVs. A second-order damage tensor is introduced to describe the anisotropic damage state of the SFRP and the tensorial damage evolution equations are used based on the damage mechanism of micro voids/cracks nucleation, growth and coalescence. The constitutive model developed herein arises employing standard postulates of continuum mechanics with the kinematics, thermodynamics, and kinetics being internally consistent. The developed model is then calibrated to a 35 wt% glass fiber reinforced polyamide 66 (PA66GF-35) for future numerical analyses.
引用
收藏
页数:9
相关论文
共 41 条
  • [1] THE USE OF TENSORS TO DESCRIBE AND PREDICT FIBER ORIENTATION IN SHORT FIBER COMPOSITES
    ADVANI, SG
    TUCKER, CL
    [J]. JOURNAL OF RHEOLOGY, 1987, 31 (08) : 751 - 784
  • [2] On modeling the micro-indentation response of an amorphous polymer
    Anand, L
    Ames, NM
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2006, 22 (06) : 1123 - 1170
  • [3] Mechanical response of a short fiber-reinforced thermoplastic: Experimental investigation and continuum mechanical modeling
    Andriyana, A.
    Billon, N.
    Silva, L.
    [J]. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2010, 29 (06) : 1065 - 1077
  • [4] [Anonymous], 1984, CONTINUUM THEORY MEC, DOI DOI 10.1007/978-3-7091-4336-0
  • [5] On kinematic, thermodynamic, and kinetic coupling of a damage theory for polycrystalline material
    Bammann, D. J.
    Solanki, K. N.
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2010, 26 (06) : 775 - 793
  • [6] Bammann D.J., 1990, APPL MECH REV, V43, P312
  • [7] Local anisotropy analysis of injection moulded fibre reinforced polymer composites
    Bernasconi, A.
    Cosmi, F.
    Dreossi, D.
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (12) : 2574 - 2581
  • [8] An internal state variable material model for predicting the time, thermomechanical, and stress state dependence of amorphous glassy polymers under large deformation
    Bouvard, J. L.
    Francis, D. K.
    Tschopp, M. A.
    Marin, E. B.
    Bammann, D. J.
    Horstemeyer, M. F.
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2013, 42 : 168 - 193
  • [9] A general inelastic internal state variable model for amorphous glassy polymers
    Bouvard, J. L.
    Ward, D. K.
    Hossain, D.
    Marin, E. B.
    Bammann, D. J.
    Horstemeyer, M. F.
    [J]. ACTA MECHANICA, 2010, 213 (1-2) : 71 - 96
  • [10] LARGE INELASTIC DEFORMATION OF GLASSY-POLYMERS .1. RATE DEPENDENT CONSTITUTIVE MODEL
    BOYCE, MC
    PARKS, DM
    ARGON, AS
    [J]. MECHANICS OF MATERIALS, 1988, 7 (01) : 15 - 33