Quasi-static and high strain rate response of aluminum matrix syntactic foams under compression

被引：50
|
作者：
Myers, Kyle [1 ]
Katona, Balint [2 ]
Cortes, Pedro [1 ,3 ]
Orbulov, Imre Norbert [2 ,4 ]
机构：
[1] Youngstown State Univ, Mat Sci & Engn, Youngstown, OH 44555 USA
[2] Budapest Univ Econ Technol & Econ, Dept Mat Sci & Engn, Fac Mech Engn, H-1111 Budapest, Hungary
[3] Youngstown State Univ, Civil Environm & Chem Engn, Youngstown, OH 44555 USA
[4] MTA BME Res Grp Composite Sci & Technol, H-1111 Budapest, Hungary
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2015年 / 79卷
关键词：
Foams; Fracture; Mechanical properties; Mechanical testing; DEFORMATION-BEHAVIOR; DYNAMIC COMPRESSION; MECHANICAL-BEHAVIOR; RELATIVE DENSITY; COMPOSITES; MICROSTRUCTURE; PERFORMANCE; FABRICATION; SIZE; IRON;
D O I：
10.1016/j.compositesa.2015.09.018
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Aluminum alloy matrix syntactic foams were produced by inert gas pressure infiltration. Four different alloys and ceramic hollow spheres were applied as matrix and filler material, respectively. The effects of the chemical composition of the matrix and the different heat-treatments are reported at different strain-rates and in compressive loadings. The higher strain rates were performed in a Split-Hopkinson pressure bar system. The results show that, the characteristic properties of the materials strongly depends on the chemical composition of the matrix and its heat-treatment condition. The compressive strength of the investigated foams showed a limited sensitivity to the strain rate, its effect was more pronounced in the case of the structural stiffness and fracture strain. The failure modes of the foams have explicit differences showing barreling and shearing in the case of quasi-static and high strain rate compression respectively. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：82 / 91
页数：10
相关论文
共 50 条
  • [21] Quasi-static compressive behaviour of aluminium cenosphere syntactic foams
    Sahu, Sonika
    Ansari, Mohd Zahid
    Mondal, Dehi Pada
    Cho, Chongdu
    MATERIALS SCIENCE AND TECHNOLOGY, 2019, 35 (07) : 856 - 864
  • [22] Strain rate and fracture analysis in closed-cell aluminum foams in tension: Quasi-static to dynamic loads
    Yao, Yiming
    Xie, Lianlian
    Xi, Huifeng
    Rong, Yao
    Mobasher, Barzin
    MATERIALS TODAY COMMUNICATIONS, 2025, 44
  • [23] Dynamic response of aluminium matrix syntactic foams subjected to high strain-rate loadings
    Alteneiji, M.
    Krishnan, K.
    Guan, Z. W.
    Cantwell, W. J.
    Zhao, Y.
    Langdon, G.
    COMPOSITE STRUCTURES, 2023, 303
  • [24] Quasi-static compressive response of compression molded glass microballoon/HDPE syntactic foam
    Jayavardhan, M. L.
    Doddamani, Mrityunjay
    COMPOSITES PART B-ENGINEERING, 2018, 149 : 165 - 177
  • [25] Mechanical Behavior of Titanium Based Metal Matrix Composites Reinforced with TiC or TiB Particles under Quasi-Static and High Strain-Rate Compression
    Markovsky, Pavlo E.
    Janiszewski, Jacek
    Stasyuk, Oleksandr O.
    Bondarchuk, Vadim I.
    Savvakin, Dmytro G.
    Cieplak, Kamil
    Goran, Daniel
    Soni, Purvesh
    Prikhodko, Sergey V.
    MATERIALS, 2021, 14 (22)
  • [26] COMPRESSIVE RESPONSES OF VULCANIZED RUBBER UNDER QUASI-STATIC AND HIGH STRAIN RATE CONDITIONS
    Hu, Wenjun
    Huang, Xicheng
    Zhang, Fangju
    Niu, Wei
    Chen, Yongmei
    ICEM15: 15TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, 2012,
  • [27] Study on Cell Deformation of Low Porosity Aluminum Foams under Quasi-Static Compression by X-Ray Tomography
    Wang, Ningzhen
    Chen, Xiang
    Maire, Eric
    Kamm, Paul H.
    Cheng, Ying
    Li, Yanxiang
    Garcia-Moreno, Francisco
    ADVANCED ENGINEERING MATERIALS, 2020, 22 (10)
  • [28] Preparation and quasi-static compression properties of hybrid aluminum matrix syntactic foam reinforced with glass cenospheres and silicon carbide nanowires
    Sun, Kai
    Wang, Lin
    Zhang, Qiang
    Meng, Bo
    Wei, Zengyan
    Su, Hang
    Wei, Guoliang
    Shilko, S. V.
    Wu, Gaohui
    MATERIALS CHARACTERIZATION, 2023, 195
  • [29] Quasi-static and high strain rate properties of a cross-ply metal matrix composite
    Hall, I. W.
    Tasdemirci, A.
    Derrick, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 507 (1-2): : 93 - 101
  • [30] Microscopic deformation mechanism of inelasticity in graphene foams under quasi-static tension and compression
    Yang, Tian
    Li, Shuang
    Shi, Yixiang
    Wang, Chao
    Hao, Peixuan
    COMPUTATIONAL MATERIALS SCIENCE, 2025, 247
12345