Experimental study of a small scale bi-directional axial impulse turbine for acoustic-to-mechanical power conversion

Axial impulse turbines have been utilized for oscillating water column wave-energy conversion because of their wide operating range without stalling point. Previous studies in the oscillating-flow environment gave no information on the performance of these turbines at high frequencies. This study extends the use of these turbines to conditions close to those encountered in thermoacoustic power generators, which require the turbine to operate at a large frequency in a closed duct. The use of bi-directional turbines as acoustic-to-mechanical power converters brings several advantages, such as their low acoustic impedance, in comparison with linear alternators, which facilitates integration with thermoacoustic engines. In the study, a variable-frequency test rig is set up using atmospheric air. Then, the performance of the bidirectional impulse turbine is studied at different rotor inlet/exit angle, rotor space-to-chord ratio, stator space-to-chord ratio, stator exit angle, and tip clearance. The dependence of the conversion efficiency on flow coefficient is reported over a set of constant input gas parcel velocities. The study also introduces an impedance segment to simulate the turbine on Delta-EC. The peak efficiency of the improved case is found to be 35.2% at a flow coefficient of 0.22, resulting an improvement of 38% over the reference case. (c) 2020 Elsevier Ltd. All rights reserved.