Deformability and microstructure transformation of pilot ingot of Ti-45Al-(8-9)Nb-(W,B,Y) alloy

被引：34

作者：

Xu, XJ ^{[1
]}

Lin, JP ^{[1
]}

Wang, YL ^{[1
]}

Lin, Z ^{[1
]}

Chen, GL ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2006年 / 416卷 / 1-2期

基金：

中国国家自然科学基金;

关键词：

TiAl; jacketed forging; microstructure; workability;

D O I：

10.1016/j.msea.2005.09.110

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Thermo-mechanical processing parameters of Ti-45Al-(8-9)Nb-(W,B,Y) alloy were investigated by hot simulation tests. From the results, pilot ingots were forged, and the microstructures of the ingots before and after forging were analyzed by optical microscopy and scanning electron microscopy (SEM). The results showed that the alloy exhibited good deformability and low deformation resistance at higher temperature and lower strain rate. Crack-free pancakes were obtained by jacketed forging up to 75% engineering strain for the pilot ingots with a height-to-diameter (H/D) ratio ranging from 1.10 to 2.13. The as-forged microstructure consisted of the refined duplex microstructure for the majority of the forged sample with partially recrystallized zone near the surface. (c) 2005 Elsevier B.V. All rights reserved.

引用

页码：98 / 103

页数：6

共 14 条

[1] Physical aspects of hot-working gamma-based titanium aluminides
Appel, F
Oehring, M
Paul, JDH
Klinkenberg, C
Carneiro, T
[J]. INTERMETALLICS, 2004, 12 (7-9) : 791 - 802
[2] Microstructure and tensile properties of investment cast Ti-46Al-8Nb-1B alloy
Hu, D
Mei, JF
Wickins, M
Harding, RA
[J]. SCRIPTA MATERIALIA, 2002, 47 (04) : 273 - 278
[3] Imayev RM, 1999, GAMMA TITANIUM ALUMINIDES 1999, P565
[4] KAYBYSHEV OA, 1981, PHYS MET METAL, V64, P163
[5] Kim YW, 2003, NIOBIUM: HIGH TEMPERATURE APPLICATIONS, PROCEEDINGS, P125
[6] Effects of Nb and Al on the microstructures and mechanical properties of high Nb containing TiAl base alloys
Liu, ZC
Lin, JP
Li, SJ
Chen, GL
[J]. INTERMETALLICS, 2002, 10 (07) : 653 - 659
[7] NAKA S, 1997, STRUCTURAL INTERMETA, P323
[8] Hot workability of titanium and titanium aluminide alloys - an overview
Semiatin, SL
Seetharaman, V
Weiss, I
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 243 (1-2): : 1 - 24
[9] Effects of high niobium addition on the mechanical properties and high-temperature deformability of gamma TiAl alloy
Tetsui, T
[J]. INTERMETALLICS, 2002, 10 (03) : 239 - 245
[10] Yang CT, 2004, INTERMETALLICS, V12, P235, DOI 10.1016/j.internet.2003.10.010

← 1 2 →