Comparison of Analytical and Numerical Models for the Optimization of c-Si Solar Cells' Front Metallization

被引：6

作者：

Greulich, Johannes ^{[1
,2
]}

Fellmeth, Tobias ^{[1
]}

Glatthaar, Markus ^{[1
]}

Biro, Daniel ^{[1
]}

Rein, Stefan ^{[1
]}

机构：

[1] Fraunhofer Inst Solar Energy Syst, D-79110 Freiburg, Germany

[2] Univ Freiburg, Mat Res Ctr, D-79104 Freiburg, Germany

来源：

IEEE JOURNAL OF PHOTOVOLTAICS | 2012年 / 2卷 / 04期

关键词：

Design optimization; metallization; modeling; solar cell; VOLTAGE;

D O I：

10.1109/JPHOTOV.2012.2206567

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

Progress in metallization techniques and emitter formation technologies needs fast and reliable tools for the optimization of the metallization pattern of crystalline silicon solar cells. We present and compare three models and discuss their validity and accuracy for different emitter sheet, finger and contact resistances, and finger widths. All models yield a similar optimal number of metallization fingers for a 156 mm x 156 mm large solar cell and broad plateaus concerning the dependence of the conversion efficiency on the finger spacing, but they differ concerning the absolute value of the fill factor and the dependence of the open-circuit voltage on the number of fingers.

引用

页码：588 / 591

页数：5

共 50 条

[41] Energy Band Profile Optimization of the Emitter for High Efficiency c-Si Heterojunction Solar Cell
Zhao, Lei
Wang, Guanghong
Diao, Hongwei
Wang, Wenjing
2018 IEEE 7TH WORLD CONFERENCE ON PHOTOVOLTAIC ENERGY CONVERSION (WCPEC) (A JOINT CONFERENCE OF 45TH IEEE PVSC, 28TH PVSEC & 34TH EU PVSEC), 2018, : 2187 - 2191
[42] High mobility In2O3:H as contact layer for a-Si:H/c-Si heterojunction and μc-Si:H thin film solar cells
Scherg-Kurmes, H.
Koerner, S.
Ring, S.
Klaus, M.
Korte, L.
Ruske, F.
Schlatmann, R.
Rech, B.
Szyszka, B.
THIN SOLID FILMS, 2015, 594 : 316 - 322
[43] Effect of the Interface States on the Key Design Paramters in c-Si HIT Solar Cells
Al Wahshi, Noura
Nayfeh, Ammar
UKSIM-AMSS SEVENTH EUROPEAN MODELLING SYMPOSIUM ON COMPUTER MODELLING AND SIMULATION (EMS 2013), 2013, : 408 - 413
[44] Impact of multi-busbar front grid patterns on the performance of industrial type c-Si solar cell
Panda, T.
Sadhukhan, S.
Acharyya, S.
Banerjee, P.
Nandi, A.
Bose, S.
Mondal, N.
Das, G.
Maity, S.
Chaudhuri, P.
Saha, H.
SOLAR ENERGY, 2022, 236 : 790 - 801
[45] Electroless Nickel Deposition for Front Side Metallization of Silicon Solar Cells
Hsieh, Shu Huei
Hsieh, Jhong Min
Chen, Wen Jauh
Chuang, Chia Chih
MATERIALS, 2017, 10 (08):
[46] Aluminum Evaporation and Etching for the Front-Side Metallization of Solar Cells
Eidelloth, Stefan
Heinemeyer, Frank
Muenster, Daniel
Brendel, Rolf
IEEE JOURNAL OF PHOTOVOLTAICS, 2013, 3 (02): : 702 - 708
[47] The Effect of Interface Trap States on Reduced Base Thickness a-Si/c-Si Heterojunction Solar Cells
Chavali, Raghu Vamsi K.
Wilcox, John R.
Gray, Jeffery L.
2012 38TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC), 2012, : 1014 - 1017
[48] mc-Si:H/c-Si solar cell prepared by PECVD
XU Ying1
Rare Metals, 2006, (S1) : 176 - 179
[49] Photoelectric phenomena in ZnO(ITO)/a-Si:H(n)/c-Si(p)/Al solar cells
Yu. A. Nikolaev
V. Yu. Rud’
Yu. V. Rud’
E. I. Terukov
W. Fuhs
A. Froitzheim
Semiconductors, 2002, 36 : 1048 - 1052
[50] mc-Si:H/c-Si solar cell prepared by PECVD
Xu Ying
Liao Xianbo
Diao Hongwei
Li Xudong
Zeng Xiangbo
Liu Xiaoping
Wang Minhua
Wang Wenjing
RARE METALS, 2006, 25 : 176 - 179

← 1 2 3 4 5 →