Investigation of aging processes of Ti-6Al-4V powder material in laser melting

被引：113

作者：

Seyda, V. ^{[1
]}

Kaufmann, N. ^{[1
]}

Emmelmann, C. ^{[1
]}

机构：

[1] Hamburg Univ Technol TUHH, Inst Laser & Syst Technol ILAS, D-21073 Hamburg, Germany

来源：

LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) | 2012年 / 39卷

关键词：

laser melting; Ti-6Al-4V powder; particle size distribution; bulk material properties;

D O I：

10.1016/j.phpro.2012.10.057

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

Laser melting of titanium material, e.g. Ti-6Al-4V, offers great potential in manufacturing automotive components, lightweight structures and medical implants. In order to achieve required mechanical properties of laser melted components quality of powder materials is essential. Unmelted powder is recycled and reused in a subsequent process. Due to repeated recycling it is suggested that powder material changes. In this paper aging processes of Ti-6Al-4V powder are studied. It was observed that powder particles coarsen and flowability increases. Comparing examined powder characteristics to bulk material properties it was noticed that there are significant effects of aged powder on laser melted components. (C) 2011 Published by Elsevier B.V. Selection and/or review under responsibility of Bayerisches Laserzentrum GmbH

引用

页码：425 / 431

页数：7

共 11 条

[1]

Aumund-Kopp C., 2008, PULVERMETALLURGIE WI, V24, P181

[2]

Eisen M., 2008, RAPID MANUFACTURING, V90, p[3, 1]

[3]

Liu B., INVESTIGATION THE EFFECT OF PARTICLE SIZE DISTRIBUTION ON PROCESSING PARAMETERS OPTIMISATION IN SELECTIVE LASER MELTING PROCESS

[4]

Peters M., 2002, Titan und Titanlegierungen

[5]

Skrynecki N., 2010, KUNDENORIENTIERTE OP

[6]

Spierings A., 2009, 20 ANN INT SOL FREE, V2009

[7] Comparison of density measurement techniques for additive manufactured metallic parts [J].

Spierings, A. B. ;

Schneider, M. ;

Eggenberger, R. .

RAPID PROTOTYPING JOURNAL, 2011, 17 (05) :380-386

[8] Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts [J].

Spierings, A. B. ;

Herres, N. ;

Levy, G. .

RAPID PROTOTYPING JOURNAL, 2011, 17 (03) :195-202

[9]

Thijs L, 2010, ACTAMATERIALIA, V58

[10] Selective laser melting of biocompatible metals for rapid manufacturing of medical parts [J].

Vandenbroucke, Ben ;

Kruth, Jean-Pierre .

RAPID PROTOTYPING JOURNAL, 2007, 13 (04) :196-203

← 1 2 →