Stabilized zirconia-based selective NO2 sensor using sol-gel derived Nb2O5 sensing-electrode

被引:32
|
作者
Mahendraprabhu, Kamaraj [1 ]
Elumalai, Perumal [1 ]
机构
[1] Pondicherry Univ, Madanjeet Sch Green Energy Technol, Dept Green Energy Technol, Electrochem Energy & Sensors Lab, Pondicherry 605014, India
来源
关键词
Sol-gel; Nb2O5; YSZ; Mixed potential; NO2; sensor; GAS SENSORS; TEMPERATURE; NIO; PERFORMANCE;
D O I
10.1016/j.snb.2016.07.010
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
Niobium pentoxide (Nb2O5) powder was synthesized by citrate-based sol-gel method using niobium pentachloride as precursor and citric acid as gelling agent. The synthesized powder was characterized by X-ray diffraction (XRD), Fourier transformed infra-red spectroscopy (FT-IR) and scanning electron microscope (SEM). Yttria-stabilized zirconia (YSZ)-based electrochemical sensor was fabricated using the Nb2O5 powder as sensing electrode (SE) and Pt as reference electrode (RE), and its sensing characteristics were examined in the temperature range of 750-850 degrees C under each of various O-2 concentrations (5, 10, 15 and 21 vol%). It was observed that the YSZ-based sensor attached with Nb2O5-SE exhibited selective and sensitive response to NO2 at 800 degrees C in all the measured O-2 concentrations. The sensor showed the highest sensitivity and selectivity to NO2 in 5 vol% O-2. The NO2 sensing mechanism of the present sensor was confirmed to be mixed potential-type. The sensor exhibited stable response to NO2 for the examined period of more than a month. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:105 / 110
页数:6
相关论文
共 50 条
  • [41] Biocompatible Nb2O5 thin films prepared by means of the sol-gel process
    Velten, D
    Eisenbarth, E
    Schanne, N
    Breivie, J
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2004, 15 (04) : 457 - 461
  • [42] High-temperature NO2 gas sensor based on stabilized zirconia and CoTa2O6 sensing electrode
    Liu, Fangmeng
    Wang, Bin
    Yang, Xue
    Guan, Yehui
    Wang, Qingji
    Liang, Xishuang
    Sun, Peng
    Wang, Yue
    Lu, Geyu
    SENSORS AND ACTUATORS B-CHEMICAL, 2017, 240 : 148 - 157
  • [43] Performances of planar NO2 sensor using stabilized zirconia and NiO sensing electrode at high temperature
    Elumalai, P
    Miura, N
    SOLID STATE IONICS, 2005, 176 (31-34) : 2517 - 2522
  • [44] Stabilized zirconia-based acetone sensor utilizing Fe2TiO5-TiO2 sensing electrode for noninvasive diagnosis of diabetics
    Wang, Jing
    Jiang, Li
    Zhao, Lianjing
    Liu, Fangmeng
    You, Rui
    Yang, Zijie
    He, Junming
    Liu, Tong
    Zhang, Chuan
    Wang, Chenguang
    Liang, Xishuang
    Sun, Peng
    Lu, Geyu
    SENSORS AND ACTUATORS B-CHEMICAL, 2020, 321 (321):
  • [45] Highly sensitive impedance-based propene sensor using stabilized zirconia and zinc oxide sensing-electrode
    Wama, Ryotaro
    Utiyama, Masahiro
    Plashnitsa, Vladimir V.
    Miura, Norio
    ELECTROCHEMISTRY COMMUNICATIONS, 2007, 9 (12) : 2774 - 2777
  • [46] Stabilized zirconia-based sensor utilizing SnO2-based sensing electrode with an integrated Cr2O3 catalyst layer for sensitive and selective detection of hydrogen
    Yamaguchi, Mami
    Anggraini, Sri Ayu
    Fujio, Yuki
    Sato, Tomoaki
    Breedon, Michael
    Miura, Norio
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2013, 38 (01) : 305 - 312
  • [47] RU(II) sensitized Nb2O5 solar cell made by the sol-gel process
    Guo, P
    Aegerter, MA
    THIN SOLID FILMS, 1999, 351 (1-2) : 290 - 294
  • [48] Formation and capacitance of Nb2O5 thin film on aluminum foil by sol-gel process
    Lai, Gao-Chao
    Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan, 1999, 107 (1252): : 1221 - 1224
  • [49] Formation and capacitance of Nb2O5 thin film on aluminum foil by sol-gel process
    Lai, GC
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1999, 107 (12) : 1221 - 1224
  • [50] Nb2O5 nanosize powders prepared by sol-gel - Structure, morphology and dielectric properties
    Graca, M. P. F.
    Meireles, A.
    Nico, C.
    Valente, M. A.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 553 : 177 - 182