Preparation and mechanical properties of natural rubber powder modified by carbon nanotubes

被引:37
|
作者
Wang, JD [1 ]
Zhu, YF [1 ]
Zhou, XW [1 ]
Sui, G [1 ]
Liang, J [1 ]
机构
[1] Tsinghua Univ, Dept Mech Engn, Key Lab Adv Mfg Mat Proc Technol, Beijing 100084, Peoples R China
关键词
carbon nanotubes; spray drying process; powder rubber; vulcanization; mechanical property;
D O I
10.1002/app.23076
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
A suspension of carbon nanotubes in natural latex was obtained by liquid mixing and then was used to prepare powder natural rubber composites modified with carbon nanotubes by means of spray drying process. The composite powders were round-like and fine, with an average diameter of less than about 5 mu m. The dispersion of carbon nanotubes in the rubber matrix was improved remarkably compared with that obtained by the mechanical mixing method. By means of vulcanization tests, it was found that the addition of vulcanizing agent necessary for the powder rubber containing carbon nanotubes should be evidently greater than that in rubber prepared by mechanical mixing, there evidently existed vulcanization reversions for the natural rubber prepared by mechanical mixing, which disappeared in the powder rubber containing carbon nanotubes prepared by the spray drying process. The mechanical properties of the powder natural rubber containing carbon nanotubes were much improved because of the modification effect of carbon nanotubes in rubber. (c) 2006 Wiley Periodicals, Inc.
引用
收藏
页码:4697 / 4702
页数:6
相关论文
共 50 条
  • [1] Preparation and mechanical properties of natural rubber powder modified by carbon nanotubes
    Wang, J.D.
    Zhu, Y.F.
    Zhou, X.W.
    Sui, G.
    Liang, J.
    Journal of Applied Polymer Science, 2006, 100 (06): : 4697 - 4702
  • [2] Preparation and properties of natural rubber reinforced with polydopamine-coating modified carbon nanotubes
    Lu, Y-L.
    Ma, J.
    Xu, T-Y.
    Wang, W-C.
    Jiang, Y.
    Zhang, L-Q.
    EXPRESS POLYMER LETTERS, 2017, 11 (01): : 21 - 34
  • [3] Effect of Modified Natural Rubber and Functionalization of Carbon Nanotubes on Properties of Natural Rubber Composites
    Nakaramontri, Yeampon
    Kummerloewe, Claudia
    Nakason, Charoen
    Vennemann, Norbert
    ADVANCES IN RUBBER, 2014, 844 : 301 - +
  • [4] Mechanical Properties of Carbon Nanotubes Reinforced Natural Rubber Composites
    Jiang, Hong-Xia
    Ni, Qing-Qing
    Natsuki, Toshiaki
    MULTI-FUNCTIONAL MATERIALS AND STRUCTURES II, PTS 1 AND 2, 2009, 79-82 : 417 - 420
  • [5] Preparation and properties of natural rubber composites reinforced with pretreated carbon nanotubes
    Sui, G.
    Zhong, W. H.
    Yang, X. P.
    Yu, Y. H.
    Zhao, S. H.
    POLYMERS FOR ADVANCED TECHNOLOGIES, 2008, 19 (11) : 1543 - 1549
  • [6] Combustion and mechanical properties of natural rubber based on carboxyl modified carbon nanotubes and intumescent flame retardant
    Zhang, Xiaoguang
    Shi, Haijun
    Liu, Jie
    Li, Jinming
    Chen, Xilei
    He, Yan
    PLASTICS RUBBER AND COMPOSITES, 2022, 51 (09) : 480 - 488
  • [7] Highly enhanced electrical and mechanical properties of methyl methacrylate modified natural rubber filled with multiwalled carbon nanotubes
    Salaeh, Subhan
    Thitithammawong, Anoma
    Salae, Arfandee
    POLYMER TESTING, 2020, 85
  • [8] Application of Epoxidized Natural Rubber in the Preparation of Natural Rubber/Carbon Black/Carbon Nanotubes Composites
    Yu Y.
    Duan W.
    Zhang J.
    Wang H.
    Xin Z.
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2020, 36 (12): : 27 - 33
  • [9] Comparative Studies on the Mechanical Properties of Natural Rubber and Natural Rubber Filled With Multi-Walled Carbon Nanotubes
    Ismail, R.
    Ibrahim, A.
    Rusop, M.
    Adnan, A.
    8TH INTERNATIONAL CONFERENCE ON NANOSCIENCE AND NANOTECHNOLOGY 2017 (NANO-SCITECH 2017), 2018, 1963
  • [10] Effect of multi-wall carbon nanotubes on the mechanical properties of natural rubber
    Fakhru'l-Razi, A.
    Atieh, M. A.
    Girun, N.
    Chuah, T. G.
    El-Sadig, M.
    Biak, D. R. A.
    COMPOSITE STRUCTURES, 2006, 75 (1-4) : 496 - 500