Determination of cohesive laws of composite bonded joints under mode II loading

In this work, mode II cohesive laws of carbon-epoxy composite bonded joints were obtained using the direct method applied to the end notched flexure (ENF) test. The direct method is based on the differentiation of the relation between the evolution of the fracture energy (J(II)) and the crack tip opening displacement in mode II (CTODII) during the test. A data reduction scheme based on equivalent crack length concept was used to obtain the evolution of the fracture energy during the test. The method allows overcoming problems related to identification of crack tip in mode II tests and the presence of a non-negligible fracture process zone (FPZ), which both difficult the right estimate of J(II). The digital image correlation technique (DIC) was used to monitor the CTODII, which was synchronized with the load-displacement data. A trapezoidal cohesive law was fitted to the experimental one in order to perform numerical simulations using finite element analysis. The main goal was to validate all the procedure used to get the cohesive laws. The good agreement obtained between the numerical and experimental load-CTODII curves and between the cohesive laws demonstrates the adequacy of the proposed procedure concerning the evaluation of the composite bonded joints cohesive laws under mode II loading. (C) 2013 Elsevier Ltd. All rights reserved.