Tensile response and fracture and failure behavior of jute fabrics-flyash-vinylester hybrid composites

被引：5

作者：

Stocchi, A. ^{[1
]}

Lauke, B. ^{[2
]}

Giannotti, M. I. ^{[3
,4
]}

Vazquez, A. ^{[5
]}

Bernal, C. ^{[6
]}

机构：

[1] INTEMA UNMdP CONICET, Div Polymer, Mar Del Plata, Buenos Aires, Argentina

[2] Leibniz Inst Polymer Res Dresden, D-01069 Dresden, Germany

[3] Univ Barcelona, Biomed Res Networking Ctr Bioengn Biomat & Nanome, E-08028 Barcelona, Spain

[4] Inst Bioengn Catalonia IBEC, Barcelona 08028, Spain

[5] Univ Buenos Aires, Fac Engn, INTECIN UBA CONICET Construct Dept, Polymers & Composite Mat Grp, Buenos Aires, DF, Argentina

[6] INTECIN UBA CONICET, Adv Mat Grp, Buenos Aires, DF, Argentina

来源：

FIBERS AND POLYMERS | 2013年 / 14卷 / 02期

关键词：

Natural fibers; Fly ash; Hybrid composite; Mechanical properties; Fracture; RICE HUSK ASH; MECHANICAL-PROPERTIES; FIBER COMPOSITES; DIELECTRIC-PROPERTIES; POLYPROPYLENE; TOUGHNESS; STRENGTH; HEMP;

D O I：

10.1007/s12221-013-0285-2

中图分类号：

TB3 [工程材料学]; TS1 [纺织工业、染整工业];

学科分类号：

0805 ; 080502 ; 0821 ;

摘要：

In this work, hybrid materials consisting on a vinylester matrix simultaneaously reinforced with jute woven fabrics and flyash particles were prepared. The tensile response and the fracture and failure behavior of these hybrid composites were investigated. Thermal stability of these materials was also studied. The aim was to obtain an environmentally friendly hybrid material with a good balance of tensile and fracture properties at relatively low cost. The effect of a novel treatment for the jute fabrics on the hybrids mechanical and fracture properties was investigated. The best balance of tensile and fracture properties was obtained for the hybrid consisting of fabrics treated with alkali under stress and fly ashes which also exhibited relatively high thermal stability.

引用

页码：285 / 291

页数：7

共 38 条

[1] Work of fracture and fracture surface energy of magnesia-spinel composites [J].

Aksel, C ;

Warren, PD .

COMPOSITES SCIENCE AND TECHNOLOGY, 2003, 63 (10) :1433-1440

[2]

Alvarez V., 2006, J THERMAL ANAL CALOR, V85, P2

[3] The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1 - polyester resin matrix [J].

Aziz, SH ;

Ansell, MP .

COMPOSITES SCIENCE AND TECHNOLOGY, 2004, 64 (09) :1219-1230

[4]

Bose Suryasarathi., 2004, Journal of Minerals Materials Characterization Engineering, V3, P65, DOI [10.4236/jmmce.2004.32007, DOI 10.4236/JMMCE.2004.32007]

[5]

Chand N, 2000, INDIAN J CHEM TECHN, V7, P192

[6]

Chand N, 1999, INDIAN J ENG MATER S, V6, P342

[7]

Chand N, 2000, INDIAN J PURE AP PHY, V38, P526

[8]

Chand N., 2000, INDIAN J ENG MATER S, V6, P342

[9] Recycling rice hull ash: A filler material for polymeric composites? [J].

Chaudhary, DS ;

Jollands, MC ;

Cser, F .

ADVANCES IN POLYMER TECHNOLOGY, 2004, 23 (02) :147-155

[10] Properties and performances of various hybrid glass/natural fibre composites for curved pipes [J].

Cicala, G. ;

Cristaldi, G. ;

Recca, G. ;

Ziegmann, G. ;

El-Sabbagh, A. ;

Dickert, M. .

MATERIALS & DESIGN, 2009, 30 (07) :2538-2542

← 1 2 3 4 →