Final Design of the 40 T Hybrid Magnet Superconducting Outsert

被引：20

作者：

Chen, W. G. ^{[1
]}

Tan, Y. F. ^{[1
]}

Chen, Z. M. ^{[1
]}

Zhu, J. W. ^{[1
]}

Chen, Z. Y. ^{[1
]}

Pan, Y. N. ^{[1
]}

Wang, F. T. ^{[1
]}

Huang, P. C. ^{[1
]}

Kuang, G. L. ^{[1
]}

机构：

[1] Chinese Acad Sci, Chinese High Magnet Field Lab, Hefei 230031, Anhui, Peoples R China

来源：

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY | 2013年 / 23卷 / 03期

关键词：

FEA; hybrid magnet; structural design; superconducting outsert;

D O I：

10.1109/TASC.2012.2232339

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

A 40 T hybrid magnet is being developed at the High Magnetic Field Laboratory of the Chinese Academy of Sciences. The magnet consists of a resistive insert and a superconducting outsert providing nominally 29 T and 11 T, respectively. The super-conducting outsert with a room temperature bore diameter of 800 mm is composed of three Nb3Sn coils wound from four grades of cable-in-conduit conductor cooled with forced-flow supercritical helium at an inlet temperature of 4.5 K. This paper gives the final design of coils and support structure of the superconducting outsert. Finite element analyses has been performed for normal operational and fault loads. We also describe the cooling scheme, quench detection, and protection.

引用

页数：4

共 50 条

[31] Conceptual Design Optimization of a 60 T Hybrid Magnet
Pugnat, Pierre
Schneider-Muntau, Hans J.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2020, 30 (04)
[32] Development of a 10 T cryocooled superconducting magnet with a room temperature bore of 360 mm for a 29 T hybrid magnet
Ito, T.
Ishizuka, M.
Tsurudome, T.
Ookubo, H.
Sakuraba, J.
Awaji, S.
Nishijima, G.
Koyama, K.
Takahashi, K.
Watanabe, K.
ADVANCES IN CRYOGENIC ENGINEERING, VOLS 51A AND B, 2006, 823 : 1743 - +
[33] Analysis and redesign of the thermal shield for the 40-T hybrid magnet at the CHMFL
Fang, Zhen
Sun, Xixin
Chen, Wenge
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2022, 592
[34] Cryogenic design of the 43 T LNCMI Grenoble hybrid magnet
Hervieu, B.
Berriaud, Ch.
Berthier, R.
Debray, F.
Fazilleau, Ph.
Manil, P.
Massinger, M.
Pfister, R.
Pugnat, P.
Ronayette, L.
Trophime, C.
PROCEEDINGS OF THE 25TH INTERNATIONAL CRYOGENIC ENGINEERING CONFERENCE AND INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE 2014, 2015, 67 : 692 - 697
[35] Thermal Performance Simulation of a Model Coil for a 40-T Hybrid Magnet
Tan, Yunfei
Ren, Yong
Chen, Wenge
Zhu, Jiawu
Li, Junjie
He, Peng
Kuang, Guangli
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2011, 21 (06) : 3608 - 3611
[36] Design and Manufacture of the Low-Resistance Nb3Sn Joints for the CHMFL 40 T Hybrid Magnet
Tan, Yunfei
Chen, Wenge
Zhu, Jiawu
Chen, Zhuomin
Pan, Yinnian
Wang, Futang
Chen, Zhiyou
He, Peng
Ren, Yong
Kuang, Guangli
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2011, 21 (03) : 2020 - 2023
[37] Design of an 8 MW water-cooled magnet for a 35 T hybrid magnet at theHFLSM
Takahashi, K.
Awaji, S.
Sasaki, Y.
Koyama, K.
Watanabe, K.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2006, 16 (02) : 977 - 980
[38] Improvement of a Large Bore Cryogen-Free Superconducting Magnet for a Hybrid Magnet
Tsurudome, T.
Mikami, Y.
Hashimoto, A.
Mitsubori, H.
Ookubo, H.
Sakuraba, J.
Kato, T.
Watazawa, K.
Watanabe, K.
Awaji, S.
Oguro, H.
Hanai, S.
Ioka, S.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2016, 26 (03)
[39] Superconducting magnet technology for the outer coils of resistive-superconducting hybrid magnets
Bird, Mark D.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2024, 37 (12)
[40] Investigation of 15 to 24 MW Resistive Insert Magnets Built Into a 20 T empty set440 mm Room-Temperature Bore Superconducting Outsert Magnet
Asano, Toshihisa
Kiyoshi, Tsukasa
Watanabe, Kazuo
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2012, 22 (03)

← 1 2 3 4 5 →