An investigation into parallel and cross grinding of BK7 glass

Conventional grinding of BK7 glass will normally result in brittle fracture at the surface, generating severe sub-surface damage and poor surface finish. The precision grinding of BK7 glass in parallel and cross grinding modes has been investigated. Grinding process, maximum chip thickness, ductile/brittle regime, surface roughness and sub-surface damage have been addressed. Special attention has been given to the condition for generating a ductile mode response on the ground surface. A polishing-etching method has been used to obtain the depth of sub-surface damage. Experiments reveal that the level of surface roughness and depth of sub-surface damage vary differently for different grinding modes. This study gives an indication of the strategy to follow to achieve high quality ground surfaces on brittle materials. (c) 2005 Elsevier Inc. All rights reserved.